PEOPLE
 
 
Yong-Kyu "YK" Yoon, PhD

Assistant Professor
SUNY at Buffalo
Bonner Hall 215J
Phone: 716-645-1029
ykyoon[at]buffalo[dot]edu
Resume

Research Interests

  • MEMS and nanotechnology
  • RF/Microwave, millimeter wave and terahertz system
  • Micro/nano-biomedical devices and bio molecule (drug/vaccine/gene) delivery
  • µ-TAS, lab-on-a-chip
  • Wireless/wired sensors and actuators
  • Metamaterial and its RF application

Education

  • Georgia Institute of Technology Atlanta, GA, USA
    Ph.D. in Electrical and Computer Engineering May 2004
    Dissertation: Micromachined Components for RF Systems
    Minor: Mathematics
    Research Advisor: Dr. Mark G. Allen
  • New Jersey Institute of Technology Newark, NJ, USA
    MS in Electrical and Computer Engineering May 1999
    Thesis: Integrated Barcode Scanner with Combined CMOS and MEMS Technology
    Research Advisor: Dr. William N. Carr
  • Seoul National University Seoul, Korea MS. in Electrical Engineering Feb. 1994
    Thesis: A Study of Induction-type Micro Electrohydrodynamic (EHD) Pump using Temperature Gradient
    Research Advisor: Dr. Yong-Kweon Kim
    BS in Electrical Engineering Feb. 1992

Publications

Journal Papers:

2009

  1. Tae-Soon Yun, Ki-Byoung Kim, Yong-Kyu Yoon, and Jong-Chul Lee, “Analysis and Design of Sub Bandpass Filter Using Tapped-line Geometry,” Accepted on Microwave and Optical technology Letters
  2. Y. Zhao, Y.K. Yoon, S.O. Choi, X. Wu, Z. Liu, and M.G. Allen, “Three dimensional metal pattern transfer for replica molded microstructures,” Applied Physics Letters, vol. 94, no. 2, 023301, 2009
  3. J. K. Kim, S. Y. Cha, T. S. Yun, and Y. K. Yoon, "2.45 GHz Inter-/Intra- Board Wireless Communication using a CPW-fed Vertical Bow-tie Antenna" is accepted in Microwave and Optical Technology Letters in January 2009. Abstract

2008

  1. A.P. Zhang, S. He, K.T. Kim, Y.-K. Yoon, R. Burzynski, M. Samoc, and P.N. Prasad, “Fabrication of Submicron Structures in Nanoparticle/Polymer Composite by Holographic Lithography and Reactive Ion Etching,” Applied Physics Letters, 93, 203509, 2008
  2. A.P. Zhang, R. Burzynski, Y.-K. Yoon, P. Prasad, and S. He, “Double-Layer Fabrication Scheme for Large-Area Polymeric Photonic Crystal Membrane on Silicon Surface by Multi-Beam Interference Lithography, “ Optics Letters, vol. 33, no. 12, pp 1303-1305, 2008
  3. X. Wu, G. Yuan, Y.-K. Yoon, and M.G. Allen, “Kinematically Stabilized Microbubble Actuator Array,” Journal of Microelectromechanical Systems (MEMS), vol. 17, no. 1, pp. 124 – 132, 2008

2007

  1. J.-H. Park, S.-O. Choi, R. Kamath, Yong-Kyu Yoon, M.G. Allen, and M.R. Prausnitz, “Polymer particle-based micromolding to fabricate novel microstructures,” Biomedical Microdevices, vol. 9, no. 2, 2007, pp. 223 – 234
  2. J.-H. Park, Yong-Kyu Yoon, S.-O. Choi, M.R. Prausnitz, and M.G. Allen, “Tapered Conical Polymer Microneedles Fabricated Using Integrated Lens Technique for Transdermal Drug Delivery,” IEEE Trans. Biomedical Engineering, vol. 54, no. 5, 2007, pp. 903-913

2006

  1. B. Pan, Yong-Kyu Yoon, J. Papapolymerou, M. Tentzeris, and M. Allen, “Analysis and Characterization of a High Performance Ka-band Surface Micromachined Elevated Patch Antenna,” IEEE Antenna and Wireless Propagation Letters (AWPL) vol. 5, no. 1, 2006, pp. 511 – 514
  2. S. Choi, S.-H. Kim, Yong-Kyu Yoon, and M.G. Allen, “A Magnetically Excited and Sensed MEMS-Based Resonant Compass,” IEEE Trans. Magnetics, vol. 42, no. 10, 2006, pp. 3506-3508
  3. Wenjing Ye, Yong-Kyu Yoon, and Mark G. Allen, “Theoretical Investigation of Gas Separation in a Micro Channel by Thermal Diffusion,” Engineering Analysis with Boundary Elements (EABE), vol. 30, no. 11, Nov. 2006, pp. 1006 – 1010
  4. Yong-Kyu Yoon, Jung-Hwan Park, and Mark G. Allen, “Multidirectional UV Lithography for Complex 3-D MEMS Structures,” Journal of Microelectromechanical Systems (MEMS), vol. 15, no. 5, pp. 1121-1130, 2006
  5. Y. Wang, G. Yuan, Yong-Kyu Yoon, M.G. Allen, and S.A. Bidstrup, “Optimization of Synthetic Jet Fluidic Structures in Printed Wiring Boards,” Journal of Electronic Packaging, vol. 128, pp. 353 – 359, Dec. 2006
  6. Y. Wang, G. Yuan, Yong-Kyu Yoon, M.G. Allen, and S.A. Bidstrup, “Large Eddy Simulation (LES) for Synthetic Jet Management,” International Journal of Heat and Mass Transfer, vol. 49, no. 13-14, July 2006, pp. 2173-2179
  7. Yong-Kyu Yoon, J. S. Kenney, A.T. Hunt, and M.G. Allen, “Low-loss Microelectrodes Fabricated Using Reverse-side Exposure for Tunable Ferroelectric Capacitor,” Journal of Micromechanics and Microengineering, vol. 16, 2006, pp. 225-234

2005

  1. Yong-Kyu Yoon, Jin-Woo Park, and Mark G. Allen, “Polymer-Core Conductor Approaches for RF MEMS,” Journal of Microelectromechanical Systems (MEMS), vol. 14, no. 5, 2005, pp. 886-894
  2. Yong-Kyu Yoon and Mark G. Allen, “Embedded Conductor Technology for Micromachined RF Elements,” Journal of Micromechanics and Microengineering, vol. 15, no. 6, 2005, pp. 1317-1326
  3. Yong Wang, Guang Yuan, Yong-Kyu Yoon, Mark G. Allen, and Sue Ann Bidstrup, “Active Cooling Substrates for Thermal Management of Microelectronics,” IEEE Trans. Components and Packaging Technologies, vol. 28, no. 3, 2005, pp. 477-483

2003

  1. Yong-Kyu Yoon, Dongsu Kim, Mark G. Allen, J. Stevenson Kenney, and Andrew T. Hunt, “A Reduced Intermodulation Distortion Tunable Ferroelectric Capacitor-Architecture and Demonstration,” IEEE Trans. Microwave Theory and Techniques, vol. 51, no. 12, December 2003, pp. 2568-2576

1994

  1. Yong K. Yoon and Yong K. Kim, “Micro Pumps using Electrostatic Forces”, Trans. Korean Institute of Electrical Engineering (KIEE), vol.43, no.12 pp.2010-2019, 1994
Conference Papers:

2007

  1. Y. Zhao, Y.-K. Yoon, X. Wu, and M.G. Allen, “Micro metal transfer molding of high frequency air-lifted components,” International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers ’07), Lyon, France, June 10-14, 2007, pp. 659-662
  2. Y. Zhao, Y.-K Yoon, and M.G. Allen, “Metal-Transfer-Micromolded RF Components for System-On-Package (SOP),” Proceedings of the 57th Electronic Components and Technology Conference (ECTC), May 29 – June 1, 2007, Reno, Nevada, pp. 1877 – 1883, 2007
  3. S. Choi, S.-H. Kim, Y.-K. Yoon, and M.G. Allen, “Exploitation of nonlinear effects for enhancement of the sensing performance of resonant sensors,” International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers ’07), Lyon, France, June 10-14, 2007, pp. 1745-1748

2006

  1. B. Pan, G. DeJean, J. Papapolymerou, M.M. Tentzeris, Y. Yoon, and M.G. Allen, “High Performance System-on-Package Integrated Yagi-Uda Antennas for W-band Applications and mm-Wave Ultra-Wideband Data Links,” Proceeding of 56th IEEE Electronic Components and Technology Conference (ECTC), San Diego, CA, pp.1712-1717, May, 2006
  2. J.-H. Park, S.-O. Choi, Y.-K. Yoon, M.G. Allen, M.R. Prausnitz, “Polymer Particle-Based Micromolding to Fabricate Novel Microstructures,” AICHE 2006 Annual Meeting
  3. J.-H. Park, J.-W. Park, Y.-K. Yoon, J.-W. Lee, S.-O. Choi, Y.-H Joung, R. Kamath, Y.-C. Kim, M.G. Allen, and M.R. Prausnitz, “Wireless Induction Heating of Stratum Corneum for Transdermal Drug Delivery,” AICHE 2006 Annual Meeting
  4. Yong-Kyu Yoon and M.G. Allen, “Proximity Mode Inclined UV Lithography,” Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head Island, SC, June 4-8, 2006, pp. 98 – 99 (oral presentation)
  5. X. Wu, G. Yuan, S.-O. Choi, Y. Zhao, S.-H. Kim, Y.-K. Yoon, M.G. Allen, “Lateral Lamination Approach for Multilayer Piezoelectric Microactuator,” Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head Island, SC, June 4-8, 2006, pp. 372 – 375 (poster presentation)
  6. S-O. Choi, S. Rajaraman, Y-K. Yoon, X. Wu and M.G. Allen, “3-D Metal Patterned Microstructure using Inclined UV Exposure and Metal Transfer Micromolding Technology,” Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head Island, SC, June 4-8, 2006, pp. 348 – 351 (poster presentation)
  7. X. Wu, Y. Zhao, Y.-K. Yoon, S.-O. Choi, J.-H. Park, and M.G. Allen, “Enhanced Wettability Polymer Micromolding by a 3-D Metal Transfer Process,” The 231st American Chemical Society National Meeting, Atlanta, GA, Mar. 26 – 30, 2006
  8. S. Choi, S.-H. Kim, Y.-K. Yoon, and M.G. Allen, “A Magnetically Excited and Sensed MEMS-Based Resonant Compass,” IEEE International Magnetics Conference (Intermag), San Diego, CA, May 8-12, 2006 (Oral presentation)
  9. Wenjing Ye, Yong-Kyu Yoon, and Mark G. Allen, “Investigation of Gas Separation Induced by Thermal Loading,” IEEE Nano/Micro Engineered and Molecular Systems (NEMS) conference, Zhuhai, China, Jan. 18-20, 2006
  10. J.S. Kenney, Y.K. Yoon, M. Ahn, M.G. Allen, Z. Zhao, X. Wang, A. Hunt, and D. Kim, “Low-Voltage Ferroelectric Phase Shifters from L- to C-Band,” IEEE Aerospace Conference, March 4-11, Big Sky, MT, 2006 (Invited talk of Prof. Kenney)

2005

  1. B Pan, Y. Yoon, J. Papapolymerou, M. Tentzeris, and M. Allen, “Design and Fabrication of Substrate-Independent Integrated Antennas Utilizing Surface Micromachining,” Asian-Pacific Microwave Conference (APMC), Dec. 4-7, Suzhou, China, 2005
  2. J.-H. Park, J.-W. Park, Y.-K. Yoon, Y. Joung, S. Choi, J. Lee, M.G. Allen, M.R. Prausnitz, “Wireless thermal micro-ablation of skin for transdermal drug delivery,” BMES conference, Sep. 28-Oct. 1, 2005, Baltimore, MD
  3. X. Wu, Y. Zhao, Yong-Kyu Yoon, S.-O. Choi, J.-H. Park, and M.G. Allen, “Wafer-scale Micromolding of Unitary Polymeric Microstructures with Simultaneously Formed Functional Metal Surface,” Proceeding of International Conference on micro Total Analysis Systems (m-TAS), Boston MA, pp. 205-207, Oct. 2005
  4. Y. Zhao, X. Wu, Yong-Kyu Yoon, J.-H. Park, S.J. Kennedy, Z. Schwartz, B.D. Boyan, and M.G. Allen, “Fabrication of Micromachined Mold Masters for 3-D, High-aspect-ratio Cell Culturing Substrates,” Proceeding of 2005 ASME IMECE, Paper number IMECE2005-81991, pp.1-7, Nov. 5-11, Orlando, FL, 2005
  5. Yong-Kyu Yoon, B. Pan, M.M. Tentzeris, J. Papapolymerou, and M.G. Allen, “Surface-Micromachined Millimeter-Wave Antennas,” International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers ’05), Seoul, Korea, June 5-9, 2005, pp. 1986-1989
  6. J.-W. Park, J.-H. Park, Yong-Kyu Yoon, Y.-H. Joung, S.-O. Choi, M.R. Prausnitz, and M.G. Allen, “Wireless Thermal Micro-Ablation of Skin for Transdermal Drug Delivery,” International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers ’05), Seoul, Korea, June 5-9, 2005, pp. 1238-1241
  7. S.-O. Choi, J.-H. Park, Y. Choi, Y. Kim, H.G. Gill, Yong-Kyu Yoon, M.R. Prausnitz, and M.G. Allen, “An Electrically Active Microneedle Array for Electroporation of Skin for Gene Delivery,” International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers ’05), Seoul, Korea, June 5-9, 2005, pp. 1513-1516
  8. Yong-Kyu Yoon, B. Pan, J. Papapolymerou, M.M. Tentzeris, and M.G. Allen, “A Vertical W-band Surface-Micromachined Yagi-Uda Antenna,” IEEE AP-S International Symposium and USNC/URSI National Raid Science Meeting in Washington, DC, July 3-8, 2005
  9. B. Pan, Yong-Kyu Yoon, J. Papapolymerou, M.M. Tentzeris, and M.G. Allen, “A High Performance Surface-Micromachined Elevated Patch Antenna,” IEEE AP-S International Symposium and USNC/URSI National Raid Science Meeting in Washington, DC, July 3-8, 2005
  10. B. Pan, Yong-Kyu Yoon, Y. Zhao, J. Papapolymerou, M.M. Tentzeris, and M.G. Allen, “A Broadband Surface-Micromachined 15-45 GHz Microstrip Coupler,” IEEE International Microwave Symposium in Long Beach, CA, June 12-17, 2005
  11. G. Yuan, X. Wu, Yong-Kyu Yoon, and M.G. Allen, “Kinematically-Stabilized Microbubble Actuator Arrays,” IEEE Microelectromechanical systems (MEMS) conference, Miami, FL, Jan. 31 – Feb. 4, 2005, pp. 411-414

2004

  1. Yong-Kyu Yoon, B. Pan, P. Kirby, J. Papapolymerou, M. Tentzeris, and M. G. Allen, “Surface Micromachined Electromagnetically Radiating RF MEMS,” Solid-State Sensor, Actuator, and Microsystems Workshop 2004, Hilton Head Island, SC, June 6-10, 2004, pp. 328-331
  2. S.-O. Choi, Yong-Kyu Yoon, and M.G. Allen, “A Tunable Capacitor Using an Immiscible Bifluidic Dielectric,” IEEE International Microwave Symposium 2004, pp. 873-876, 2004
  3. B. Pan, Yong-Kyu Yoon, P. Kirby, J. Papapolymerou, M. Tentzeris, and M.G. Allen, “A W-band Surface Micromachined Monopole for Low-cost Wireless Communication Systems,” IEEE International Microwave Symposium 2004, pp.1935-1938, 2004
  4. J.-H. Park, Yong-Kyu Yoon, M.R. Prausnitz, and M.G. Allen, “High-Aspect-Ratio Tapered Structure using an Integrated Lens Technique,” Proceeding of IEEE Micro Electro Mechanical Systems (MEMS), Maastricht, the Netherlands, pp.383-386, 2004

2003

  1. Y. Wang, G. Yuan, Yong-Kyu Yoon, M.G. Allen, and S.A. Bidstrup, “A MEMS Active Cooling Substrate for Microelectronics,” 2003 ASME International Mechanical Engineering Congress and Exhibition, Washington, D.C., Nov. 2003, IMECE2003-42799
  2. Y. Choi, R. Powers, Yong-Kyu Yoon, and M.G. Allen, “A Three-Dimensional Microfluidic Network for Cellular Perfusion,” The 7th International Conference on Miniaturized Chemical and BioChemical Analysis Systems (MicroTAS2003), Oct. 2003, pp. 1001-1004
  3. Yong-Kyu Yoon, R. Powers, Y. Choi, C. Courcimault, and M.G. Allen, “Micromachined Polymeric Microvasculatures: A Three-Dimensional Microfluidic System Using Inclined SU-8 Structures and Laser Machining,” 226th American Chemical Society National Meeting, New York, NY, September 7-11, 2003, in Polymer division
  4. Yong-Kyu Yoon, J.-H. Park, F. Cros, and M. G. Allen, “Integrated Vertical Screen Microfilter and Micromixer System Using Inclined SU-8 Structures,” Invited to smallTalk2003: The microfluidics, microarrays and bioMEMS conference, San Jose, CA, July 13-16, 2003
  5. Yong-Kyu Yoon, D. Kim, M.G. Allen, and J.S. Kenney, “A Reduced Intermodulation Distortion Tunable Ferroelectric Capacitor: Architecture and Demonstration,” IEEE International Microwave Symposium 2003, pp.1989-1992, 2003, Student paper contest award (2nd Place)
  6. Yong-Kyu Yoon, M.G. Allen, and A.T. Hunt, “Tunable Ferroelectric Capacitor with Low-Loss Electrodes Fabricated Using Reverse Side Exposure,” Proceeding of 53rd IEEE Electronic Components and Technology Conference (ECTC), New Orleans, USA, pp.1534-1540, 2003
  7. Y. Wang, G. Yuan, Yong-Kyu Yoon, M.G. Allen, and S.A. Bidstrup, “An Active Cooling Substrate for IC Thermal Management,” Industrial Advisory Board Meeting at Georgia Tech Packaging Research Center, Feb. 2003, Student Poster Competition Award (2nd Place)
  8. Yong-Kyu Yoon, J.-H. Park, F. Cros, and M.G. Allen, “Integrated Vertical Screen Microfilter System Using Inclined SU-8 Structures,” Proceeding of IEEE Micro Electro Mechanical Systems (MEMS), Kyoto, Japan, pp.227-230, 2003
  9. J.-H. Park, S. Davis, Yong-Kyu Yoon, M.R. Prausnitz, and M.G. Allen, “Micromachined Biodegradable Microstructures,” Proceeding of IEEE Micro Electro Mechanical Systems (MEMS), Kyoto, Japan, pp.371-374, 2003

2002

  1. Yong-Kyu Yoon, J.-W. Park, and M.G. Allen, “RF MEMS Based on Epoxy-Core Conductors,” Digest of Solid-State Sensor, Actuator, and Microsystems Workshop 2002, Hilton Head Island, South Carolina, pp.374-375, 2002

2001

  1. Yong-Kyu Yoon and M.G. Allen, “Pt Heater/sensor Microarray for Distributed Fluidic Cooling Assessment,” Proceeding of 2001 ASME IMECE, Paper number 23894 pp.1-7, New York, 2001
  2. Yong-Kyu Yoon, E. Chen, M.G. Allen, and J. Laskar, “Embedded Solenoid Inductors for RF CMOS Power Amplifier”, Digest of the 11th International Conference on Solid-State and Actuators, Transducers’01 EurosensorsXV, Vol. 2, pp. 1114-1117, 2001
  3. Y.E. Chen, Yong Kyu Yoon, J. Laskar, and M. Allen, “A 2.4GHz Integrated CMOS Power Amplifier with Micromachined Inductors”, International microwave symposium digest, 2001 IEEE MTT-s 200, Vol. 1, pp. 523-526, 2001
Conference Abstract (Peer Reviewed)

2010

  1. Jungkwun ‘JK’ Kim, Kangsun Lee, Hongsub Jee, Kwang W. Oh, and Yong-Kyu ‘YK’ Yoon, “Fabrication of multiple height microstructures using UV lithography on timed-development-and-thermal-reflowed photoresist,” Micro Electro Mechanical Systems, 2010. MEMS 2010. IEEE 23rd International Conference, Hong Kong, China, Jan. 2010
  2. Jungkwun ‘JK’ Kim, Xiaoyu Cheng, Hyochun Ahn, David Senor Elles, and Yong-Kyu ‘YK’ Yoon, “Lithographically defined integraBLE air-lifted BOW-TIE antennas,” Micro Electro Mechanical Systems, 2010. MEMS 2010. IEEE 23rd International Conference, Hong Kong, China, Jan. 2010

2009

  1. JK Kim and YK Yoon, “Dynamic-Mode Multidirectional UV Lithography with Liquid State Photoresist,” is accepted for presentation in American Vacuum Society 56th International Symposium & Exhibition 2009.
  2. KT Kim, CI Kim, and YK Yoon, “Characteristics of La-substituted Bismuth Titanate Ferroelectric Nanofibers by Electrospinning, ”is accepted for presentation in American Vacuum Society 56th International Symposium & Exhibition 2009.
  3. GH Kim, KT Kim, CI Kim, and YK Yoon, "Synthesis of Ordered Arrays of Ba0.6Sr0.4TiO3 Nanotubes" is accepted for presentation in American Vacuum Society 56th International Symposium & Exhibition 2009. Abstract
  4. Sungyong Cha, Tae-soon Yun, Jungkwun Kim, and Y.-K. Yoon, “Pillar Array-type Parabolic Reflector Antenna Driven by Air-lifted Monopole Fed by CB-CPW for 2.4GHz Applications,” IEEE Antennas and Propagation Symposium, July 5-12, 2008, San Diego, CA
  5. Jungkwun Kim, Kangsun Lee, Kwang W. Oh, and Yong-Kyu Yoon, “Microfabrication of rounded channel and waveguide integrated microlens using timed development and thermal reflow process,” Accepted for the 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences (mTAS2009) (oral presentation)
  6. David Senior Elles and Yong-Kyu Yoon, “Compact dual band three way Bagley polygon power divider using composite right/left handed (CRLH) transmission lines,” Accepted for the IEEE International Microwave Symposium (IMS), June, 2009
  7. Jungkwun Kim, T.S. Yun, H. Jee, and Y.-K. Yoon, “Adjustable refractive index method for complex microstructures by automated dynamic mode multidirectional UV lithography,” Proceedings of International Conference of IEEE Micro Electro Mechanical Systems, Jan. 25- Jan. 29, 2009, Sorrento, Italy, pp. 733 – 736

2008

  1. HS Jee, AP Zhang, R Burzynski, KT Kim, PN Prasad, and YK Yoon, “Fabrication of Large Area Glass Submicron Pattern by Multibeam Interference Lithography and Reactive Ion Etching, ” is accepted for presentation in American Vacuum Society 55th International Symposium & Exhibition 2008.
  2. Jungkwun Kim and YK Yoon, “Dynamic-Mode Multidirectional UV Lithography with Liquid Sate Photoresist,” American Vacuum Society 55th International Symposium, Oct. 19-24, 2008, Boston, MA
  3. Kyoung Tae Kim, CI Kim, and YK Yoon, “Characteristics of La-substituted Bismuth Titanate Ferroelectric Nanofibers by Electrospinning,” American Vacuum Society 55th International Symposium, Oct. 19-24, 2008, Boston, MA
  4. GH Kim, KT Kim, CI Kim, and YK Yoon, “Synthesis of Ordered Arrays of Ba0.6Sr0.4TiO3 Nanotubes,” American Vacuum Society 55th International Symposium, Oct. 19-24, 2008, Boston, MA
  5. Hongsub Jee, AP Zhang, R. Burzynski, M. Samoc, YK Yoon, P.N. Prasad, and S. He, “Fabrication of Large Area Glass Submicron Pattern by Multibeam Interference Lithography and Reactive Ion Etching,” American Vacuum Society 55th International Symposium, Oct. 19-24, 2008, Boston, MA
  6. Jungkwun Kim, M.G. Allen, and Y.-K. Yoon, “Automated dynamic mode multidirectional UV lithography for complex 3-D microstructures,” Proceedings of International Conference of IEEE Micro Electro Mechanical Systems, Jan. 13- Jan. 17, 2008, Tucson, AZ, pp. 399 – 402
Conference Abstract (Non Peer Reviewed)

2009

  1. Gwan-Ha Kim, Eric Kozarsky, Hongsub Jee, Kyoung-Tae Kim, Jungkwun Kim, Esther Takeuchi, and Yong-Kyu Yoon, "Carbon Nanotube Embedded Three Dimensional (3-D) Carbon Microelectrodes for Rechargeable Microbatteries,” AVS 56th International Symposium and Exhibition, San Jose, USA, Nov. 2009
  2. Yong-Kyu Yoon, Jungkwun Kim, and Gloria J. Kim, “Computer-controlled Multidirectional Ultraviolet Lithography for Integrated Microsystems,” will be presented in Proceedings of 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009
  3. Jungkwun Kim, J.Y. Yang, M.M. Slaughter, G. Kim, and Y.K. Yoon, “Dynamic Mode Multidirectional UV Lithography for Tripod Honeycomb Shape Scaffold,” The Second Integrated Nanostructured Systems (INS) Workshop, University at Buffalo, Buffalo, NY, May 13, 2009

2007

  1. Jungkwun Kim, Pit Fee Jao, Sung Yong Cha, and Yong-Kyu Yoon, “Micro/Nano Fabrication and Multidisciplinary Research,” The First Integrated Nanostructured Systems (INS) Workshop, University at Buffalo, Buffalo, NY, May 18-19, 2007