LIST OF PUBLICATIONS


Refereed Journal Publications (131)

 

(1)        Purba, R., Bruneau, M., (2014). “Seismic Performance of Steel Plate Shear Walls Considering Two Different Design Philosophies of Infill Plates. I: Deterioration Model Development”, ASCE Journal of Structural Engineering (in press).

(2)        Purba, R., Bruneau, M., (2014). “Seismic Performance of Steel Plate Shear Walls Considering Two Different Design Philosophies of Infill Plates. II: Assessment of Collapse Potential”, ASCE Journal of Structural Engineering (in press).

(3)        Cimellaro, G.P., Solari, D., Bruneau, M., (2014). “Infrastructure Interdependency and Regional Resilience Index after 2011 Tohoku Earthquake in Japan”, Earthquake Engineering and Structural Dynamics (DOI: 10.1002/eqe.2422).

(4)        Cimellaro, G.P., Villa, O., Bruneau, M., (2014). “Resilience-Based Design of Natural Gas Distribution Networks”, ASCE Journal of Infrastructure Systems“ (DOI: 10.1061/(ASCE)IS.1943-555X.0000204)

(5)        Krishnappa, N., Bruneau, M., and Warn, G. (2014). ”Weak-Axis Behavior of Wide Flange Columns Subjected to Blast.” ASCE J. Struct. Eng., 140(5), 04013108, pp.1-9 (DOI: 10.1061/(ASCE)ST.1943-541X.0000917)

(6)        Berman, J.W., Bruneau, M., (2013). “Slenderness Limits for Built-up Box Links in AISC 341-10”, AISC Engineering Journal, Vol.50, No.1, pp.21-32.

(7)        Purba, R., Bruneau, M., (2012). “Case Study on the Impact of Horizontal Boundary Elements Design on Seismic Behavior of Steel Plate Shear Walls,” ASCE Journal of Structural Engineering. Vol.138, No.5, pp.647-657.

(8)        Fujikura, S., Bruneau M., (2012). “Dynamic Analysis of Multi-Hazard Resistant Bridge Piers having Concrete-Filled Steel Tube under Blast Loading,” ASCE Journal of Bridge Engineering, Vol.17, No.2, pp.249-258.

(9)        El-Bahey, S., Bruneau, M., (2012). “Bridge Piers Having Structural Fuses and Bi-steel Columns I: Experimental Testing”, ASCE Journal of Bridge Engineering, Vol.17, No.1, pp.25-35.

(10)      El-Bahey, S., Bruneau, M., (2012). “Bridge Piers Having Structural Fuses and Bi-steel Columns II: Analytical Investigation”, ASCE Journal of Bridge Engineering, Vol.17, No.1, pp.36-46.

(11)      Dowden, D., Purba, R., Bruneau, M., (2012). “Behavior of Self-Centering Steel Plate Shear Walls and Design Considerations,” ASCE Journal of Structural Engineering, Vol.138, No.1, pp.11-21.

(12)      Clifton, C., Bruneau, M., MacRae, G., Leon, R., Fussell, A., (2011). “Steel Structures Damage from the Christchurch Earthquake of February 22, 2011, NZST,” Bulletin of the New Zealand Society for Earthquake Engineering, Vol.44, No.4, pp.297-318.

(13)      Palermo, A., Wotherspoon, L., M., Wood, J., Chapman, H., Scott, A., Hogan, L., Kivell, A., Camnasio, E., Yashinsky, M., Bruneau, M., Chouw, N., (2011). “Lessons Learnt from 2011 Christchurch Earthquakes: Analysis and Assessment of Bridges,” Bulletin of the New Zealand Society for Earthquake Engineering, Vol.44, No.4, pp.319-333.

(14)      Bruneau, M., Clifton, C., MacRae, G., Leon, R., Fussell, A., Martin, P.O., (2011). “Comportement des Bâtiments Métalliques lors du Séisme de Christchurch, Nouvelle Zélande, le 22 Février 2011,” Revue Construction Métallique, No.4, pp.3-25.

(15)      Bruneau M, Clifton C, MacRae G, Leon R, Fussell A.(2011). “Steel Building Damage from the Christchurch Earthquake Series of 2010/2011”, Journal of the Structural Engineering Society New Zealand (SESOC), Vol.24, No.2., pp.27 - 42.

(16)      Dowden, D., Bruneau, M., (2011). NewZ-BREAKSS: Post-tension Rocking Connection Detail Free of Beam-Growth”, AISC Engineering Journal, Vol.48, No2, pp153-158.

(17)      Cimellaro, G., Reinhorn, A., Bruneau, M., (2011). “Performance-based Metamodel for Health Care Facilities”, Journal of Earthquake Engineering and Structural Dynamics, Vol.40, No.11, pp.1197–1217.

(18)      Qu, B., Bruneau, M.,(2011). “Plastic Moment of Intermediate Horizontal Boundary Elements of Steel Plate Shear Walls”, AISC Engineering Journal, Vol.48, No.1, pp.49-64.

(19)      Bruneau, M., El-Bahey, S., Fujikura, S., Keller, D., (2011). “Structural Fuses and Concrete-Filled Steel Shapes for Seismic- and Multi-Hazard Resistant Design,” Bulletin of the New Zealand Society for Earthquake Engineering, Vol.44, No.1, pp.44-52.

(20)      Celik, O., Bruneau, M., (2011). Skewed Slab-on-Girder Steel Bridge Superstructures with Bidirectional-Ductile End Diaphragms,” ASCE Journal of Bridge Engineering, Vol.16, No.2, pp.207-218.

(21)      El-Bahey, S., Bruneau, M., (2011). “Buckling Restrained Braces as Structural Fuses for the Seismic Retrofit of Reinforced Concrete Bridge Bents”, Engineering Structures Journal, Vol.33, No.3, pp.1052-1061.

(22)      Fujikura, S., Bruneau M., (2011). “Experimental Investigation of Seismically Resistant Bridge Piers under Blast Loading,” ASCE Journal of Bridge Engineering, Vol.16, No.1, pp.63-71.

(23)      Bruneau, M., Anagnostopoulou, M., MacRae, G., Clifton, C., Fussell, A., (2010). “Preliminary Report on Steel Building Damage from the Darfield (New Zealand) Earthquake of September 4, 2010", New Zealand Society for Earthquake Engineering Bulletin, Vol.43, No.4, pp.351-359.

(24)      Anagnostopoulou, M., Bruneau, M., Gavin, H., (2010). “Performance of Churches During the Darfield Earthquake of September 04, 2010”, New Zealand Society for Earthquake Engineering Bulletin, Vol.43, No.4, pp.374-381.

(25)      Palermo, A., LeHeux, M., Bruneau, M., Anagnostopoulou, M., Wotherspoon, L., Hogan, L., (2010). “Preliminary Findings on Performance of Bridges in the 2010 Darfield Earthquake”, New Zealand Society for Earthquake Engineering Bulletin, Vol.43, No.4, pp.412-420.

(26)      Pollino, M., Bruneau, M., (2010). Bi-Directional Behavior and Design of Controlled Rocking 4-Legged Bridge Steel Truss Piers,” ASCE Journal of Structural Engineering, Vol.136, No.12, pp.1512-1522.

(27)      Pollino, M., Bruneau, M., (2010). Seismic Testing of a Bridge Truss Pier Designed for Controlled Rocking,” ASCE Journal of Structural Engineering, Vol.136, No.12, pp.1523-1532.

(28)      El-Bahey, S., Bruneau, M., (2010). “Structural Fuse Concept For Bridges”, Transportation Research Record (a Journal of the Transportation Research Board, Vol.2201), pp.167-172.

(29)      Cimellaro, G., Reinhorn, A., Bruneau, M., (2010). “Framework for Analytical Quantification of Disaster Resilience”, Engineering Structures Journal, Vol.32, No.11, pp.3639-3649.

(30)      Lin, C.H., Tsai, K.C., Qu, B., Bruneau, M.,(2010). “Sub-structural Pseudo-dynamic Performance of Two Full-scale Two-story Steel Plate Shear Walls”, Journal of Constructional Steel Research Vol.66, pp.1467-1482

(31)      Cui, S., Bruneau, M., Kasalanati, A., (2010). “Behavior of Bi-directional Spring Unit in Isolated Floor Systems,”ASCE Journal of Structural Engineering, Vol.136, No.8, pp.994-952.

(32)      Qu, B., Bruneau, M.,(2010). Behavior of Vertical Boundary Elements in Steel Plate Shear Walls”, AISC Engineering Journal, Vol.47, No.2, pp.109-122.

(33)      Qu, B., Bruneau, M., (2010). “Capacity Design of Intermediate Horizontal Boundary Elements of Steel Plate Shear Walls ”, ASCE Journal of Structural Engineering, Vol.136, No.6, pp.665-675.

(34)      Cimellaro, G. P., Reinhorn, A. M. and Bruneau, M. (2010). “Seismic Resilience of a Hospital System”, Journal of Structure and Infrastructure Engineering, Vol.6, No.1-2, pp.127-144

(35)      Berman, J., Bruneau, M., (2009). “Cyclic Testing of a Buckling Restrained Braced Frame with Unconstrained Gusset Connections”, ASCE Journal of Structural Engineering, Vol.135, No.12, pp.1499-1510.

(36)      Qu, B., Bruneau, M., (2009). “Design of Steel Plate Shear Walls Considering Boundary Frame Moment Resisting Action”, ASCE Journal of Structural Engineering, Vol.135, No.12, pp.1511-1521.

(37)      Purba, R., Bruneau, M., (2009). Finite Element Investigation and Design Recommendations for Perforated Steel Plate Shear Walls”, ASCE Journal of Structural Engineering, Vol.135, No.11, pp.1367-1376.

(38)      Warn, G.P., Bruneau, M., (2009). “Blast Resistance of Steel Plate Shear Walls Designed for Seismic Loading”, ASCE Journal of Structural Engineering, Vol.135, No.10, pp.1222-1230.

(39)      Vian D., Bruneau, M., Tsai, K.C., Lin, Y.C., (2009). “Special Perforated Steel Plate Shear Walls with Reduced Beam Section Anchor Beams I: Experimental Investigation”, ASCE Journal of Structural Engineering, Vol.135, No.3, pp.211-220.

(40)      Vian D., Bruneau, M., Purba, R., (2009). “Special Perforated Steel Plate Shear Walls with Reduced Beam Section Anchor Beams II: Analysis and Design Recommendations”, ASCE Journal of Structural Engineering, Vol.135, No.3, pp.221-228.

(41)      Vargas, R., Bruneau, M., (2009). “Analytical Response of Buildings Designed with Metallic Structural Fuses”, ASCE Journal of Structural Engineering, Vol.135, No.4, pp.386-393.

(42)      Vargas, R., Bruneau, M., (2009). “Experimental Response of Buildings Designed with Metallic Structural Fuses”, ASCE Journal of Structural Engineering, Vol.135, No.4, pp.394-403.

(43)      Celik, O., Bruneau, M., (2009). “Seismic Behavior of Bidirectional-resistant Ductile End Diaphragms with Buckling Restrained Braces in Straight Steel Bridges”, Engineering Structures Journal, Vol.31, No.2, pp.380-393.

(44)      Fujikura, S., Bruneau M., Lopez-Garcia, D., (2008). “Experimental Investigation of Multihazard Resistant Bridge Piers having Concrete-Filled Steel Tube under Blast Loading”, ASCE Journal of Bridge Engineering, Vol.13, No.6, pp.586-594.

(45)      Lee, K., Bruneau, M., (2008). “Seismic Vulnerability Evaluation of Axially Loaded Steel Built-up Laced Members - I: Experimental Results”, Earthquake Engineering and Engineering Vibrations Journal, Vol.7, No. 2, pp.113-124.

(46)      Lee, K., Bruneau, M., (2008). “Seismic Vulnerability Evaluation of Axially Loaded Steel Built-up Laced Members - II: Evaluations”, Earthquake Engineering and Engineering Vibrations Journal, Vol.7, No. 2, pp.125-136.

(47)      Pollino, M., Bruneau, M., (2008). “Dynamic Seismic Response of Controlled Rocking Bridge Steel Truss Piers”, Engineering Structures Journal, Vol.30, No.6, p.1667-1676.

(48)      Berman, J., Bruneau, M., (2008). “Tubular Links for Eccentrically Braced Frames, I: Finite Element Parametric Study”, ASCE Journal of Structural Engineering, Vol. 134, No. 5, pp.692-701.

(49)      Berman, J., Bruneau, M., (2008). “Tubular Links for Eccentrically Braced Frames, II: Experimental Verification”, ASCE Journal of Structural Engineering, Vol. 134, No. 5,pp.702-712.

(50)      Qu, B., Bruneau, M., Lin, C.H., Tsai, K.C., (2008). Testing of Full Scale Two-story Steel Plate Shear Walls, with RBS Connections and Composite Floor”, ASCE Journal of Structural Engineering, Vol. 134, No.3, pp. 364-373.

(51)      Berman, J., Bruneau, M., (2008). “Capacity Design of Vertical Boundary Elements in Steel Plate Shear Walls”, AISC Engineering Journal, Vol. 45, No. 1, pp.57-71.

(52)      Vargas, R., Bruneau, M., (2007). “Effect of Supplemental Viscous Damping on the Seismic Response of Structural Systems with Metallic Dampers”, ASCE Journal of Structural Engineering, Vol. 133, No.10, pp.1434-1444.

(53)      Pollino, M., Bruneau, M., (2007). “Seismic Retrofit of Bridge Steel Truss Piers Using a Controlled Rocking Approach”, ASCE Journal of Bridge Engineering, Vol.12, No.5, pp.600-610.

(54)      Berman, J., Bruneau, M., (2007). “Experimental and Analytical Investigation of Tubular Links for Eccentrically Braced Frames”, Engineering Structures Journal, Vol.29, No.8, pp.1929-1938.

(55)      Bruneau, M., Reinhorn, A., (2007). “Exploring the Concept of Seismic Resilience for Acute Care Facilities”, EERI Spectra Journal, Vol.23, No.1, pp.41-62.

(56)      Bruneau, M., Berman, J., Lopez-Garcia, D., Vian, D., (2007). “A Review of Steel Plate Shear Wall Design Requirements and Research”, Engineering Journal of the American Institute of Steel Construction, Vol.44, No.4, pp. 27-34.

(57)      Bruneau, M., (2006). “Enhancing the Resilience of Communities against Extreme Events from an Earthquake Engineering Perspective”, Journal of Security Education, Vol.1, No. 4, pp.159-167.

(58)      Paquette, J., Bruneau, M., (2006). “Pseudo-dynamic Testing of Unreinforced Masonry Building with Flexible Diaphragm and Comparison with Existing Procedures”, Journal of Building and Construction Materials (Special Issue), Vol.20, No.4, pp.220-228.

(59)      Lee, K., Bruneau, M., (2005). “Energy Dissipation Demand of Compression Members in Concentrically Braced Frames”, International Journal of Steel & Composite Structures, Vol.5, No.5, pp.345-358.

(60)      Celik, O., Berman, J., Bruneau, M., (2005) “Cyclic Testing of Braces Laterally Restrained by Steel Studs”, ASCE Journal of Structural Engineering, Vol.131, No.7, pp.1114-1124.

(61)      Bruneau, M., Engelhardt, M., Filiatrault, A., Goel, S.C., Itani, A., Hajjar, J., Leon, R., Ricles, J., Stojadinovic, B., Uang, C.M, (2005). “Review of Selected Recent Research on US Seismic Design and Rretrofit Strategies for Steel Structures”, Journal of Progress in Structural Engineering and Materials, Vol.7, pp.103-114.

(62)      Berman, J., Bruneau, M., (2005). “Supplemental System Retrofit Considerations for Braced Steel Bridge Piers”, International Journal of Earthquake Engineering and Structural Dynamics - Special Issue on Transportation Structures, Vol.34, No.4-5, pp.497.517.

(63)      Berman, J., Celik, O., Bruneau, M., (2005) “Comparing Hysteretic Behavior of Light-gauge Steel Plate Shear Walls and Braced Frames”, Engineering Structures Journal, Vol.27, No.3, pp.475-485.

(64)      Lee, K., Bruneau, M., (2005). “Energy Dissipation of Compression Members in Concentrically Braced Frames: Review of Experimental Data”, ASCE Journal of Structural Engineering, Vol. 131, No.4, pp.552-559.

(65)      Berman, J., Bruneau, M., (2005). “Experimental Investigation of Light-Gauge Steel Plate Shear Walls", ASCE Journal of Structural Engineering, Vol. 131, No.2, pp. 259-267.

(66)      Berman, J., Bruneau, M., (2004). “Steel Plate Shear Walls are not Plate Girders”, AISC Engineering Journal, Vol.41, No.3, pp.95-106.

(67)      Paquette, J., Bruneau, M., Brzev, S., (2004). “Seismic Testing of Repaired Unreinforced Masonry Building Having Flexible Diaphragm”, ASCE Journal of Structural Engineering, Vol.130, No.10, pp.1487-1496.

(68)      Itani, A., Bruneau, M., Carden, L., Buckle, I. (2004). “Seismic Behavior of Steel Girder Bridge Superstructure”, invited paper, ASCE Journal of Bridge Engineering - Special Edition on Steel Bridges, Vol.9, No.3, pp.243-249.

(69)      Warn, G., Berman, J., Whittaker, A., and Bruneau, M. (2004). “Reconnaissance and Preliminary Analysis of a Damaged Building Near Ground Zero”, Journal of Structural Design of Tall and Special Buildings, Vol.12, No.5, pp.371-391.

(70)      Marson, J., Bruneau, M.,(2004). “Cyclic Testing of Concrete-Filled Circular Steel Bridge Piers Having Encased Fixed-Base Detail”,ASCE Journal of Bridge Engineering, Vol.9, No.1, pp.14-23.

(71)      Bruneau, M., Marson, J., (2004). “Seismic Design of Concrete-Filled Circular Steel Bridge Piers”, ASCE Journal of Bridge Engineering, Vol.9, No.1, pp.24-34.

(72)      Vian, D., Bruneau, M. (2003). Tests to Collapse of Single Degree of Freedom Frames Subjected to Earthquake Excitations”, ASCE Journal of Structural Engineering, Vol.129, No.12, pp.1676-1685.

(73)      Berman, J,. Bruneau, M.,(2003). “Plastic Analysis and Design of Steel Plate Shear Walls”, ASCE Journal of Structural Engineering, Vol.129, No.11, pp.1448-1456. (J. James Croes Medal of the American Society of Civil Engineers (ASCE) awarded to authors of the paper, among all journals published by ASCE, that is judged worthy of special commendation for its merit as a contribution to engineering science).

(74)      Bruneau, M., Chang, S., Eguchi, R., Lee, G., O’Rourke, T., Reinhorn, A., Shinozuka, M., Tierney, K., Wallace, W., von Winterfelt, D., (2003). “A Framework to Quantitatively Assess and Enhance the Seismic Resilience of Communities”, EERI Spectra Journal, Vol.19, No.4, pp.733-752.

(75)      Paquette, J., Bruneau, M. (2003). “Pseudo-dynamic Testing of Unreinforced Masonry Building with Flexible Diaphragm”, ASCE Journal of Structural Engineering, Vol.126, No.6, pp.708-716.

(76)      Bruneau, M., Sarraf, M., S.M., Zahrai, Alfawakhiri, F. (2002). “Displacement-Based Energy Dissipation Systems for Steel Bridges Diaphragms”, invited paper, Journal of Constructional Steel Research, Vol.58, No.5-8, pp.801–817.

(77)      Bruneau, M., Bhagwagar, T. (2002). “Seismic Retrofit of Flexible Steel Frames using Thin Infill Panels”, Engineering Structures Journal’, Vol.24, No.4, pp. 443-453.

(78)      Bruneau, M. (2002). “Building Damage from the Marmara, Turkey, Earthquake of August 17, 1999”, invited paper, Journal of Seismology, Vol.6, No.3, pp.357–377.

(79)      Bruneau, M., Tierney, K. (2002).Market-Focused and Open-Systems Approaches to Earthquake Loss-Reduction: Contextualizing Role of Engineering Research”, ASCE Natural Hazards Review, Vol.3, No.2, pp.48-54.

(80)      Alfawakhiri, F., Bruneau, M. (2001). “Local versus Global Ductility Demands in Simple Bridges”, ASCE Journal of Structural Engineering, Vol. 127, No.5, pp.554-560.

(81)      Paquette, J., Bruneau, M., Filiatrault, A. (2001). “Out-of-plane Seismic Behavior of Brick Masonry Walls of Turn-of-the-Century Residential Buildings”, ASCE Journal of Structural Engineering, Vol.127, No.5, pp.561-569.

(82)      Taghdi, M., Bruneau, M., Saatcioglu, M. (2000). “Seismic retrofit of low-rise masonry and concrete walls using steel-strips”, ASCE Journal of Structural Engineering, Vol.126, No.9, pp.1017-1025.

(83)      Taghdi, M., Bruneau, M., Saatcioglu, M. (2000). “Analysis and design of low-rise masonry and concrete walls retrofitted using steel-strips”, ASCE Journal of Structural Engineering, Vol.126, No.9, pp.1026-1032.

(84)      Bruneau, M., Bisson, M. (2000). “Hysteretic Behavior of Existing and Retrofitted Concrete-Encased Stiffened Seat Angle Connections”, Engineering Structures Journal, Vol.22, No.9, pp.1086-1096.

(85)      Tsai, K.C., Hsiao, C.P. Bruneau, M. (2000). “Overview of Building Damages in 921 Chi-Chi Earthquake”, Earthquake Engineering and Engineering Seismology, Vol.2, No.1, pp.93-108.

(86)      Alfawakhiri, F., Bruneau, M. (2000). “Flexibility of Superstructures and Supports in the Seismic Analysis of Simple Bridges”, Journal of Earthquake Engineering and Structural Dynamics, Vol.29, No.5, pp.711-729.

(87)      Zahrai, S.M., Bruneau, M. (1999). “Cyclic Testing of Ductile End-Diaphragms for Slab-on-Girder Steel Bridges”, ASCE Journal of Structural Engineering, Vol.125, No.9, pp.987-996.

(88)      Zahrai, S.M., Bruneau, M. (1999). “Ductile End-Diaphragms for the Seismic Retrofit of Slab-on-Girder Steel Bridges”, ASCE Journal of Structural Engineering, Vol.125, No.1, 1999, pp.71-80.

(89)      Sarraf, M., Bruneau, M. (1998). “Ductile Seismic Retrofit of Steel Deck-Truss Bridges. I: Strategy and Modeling”, ASCE Journal of Structural Engineering, Vol.124, No.11, 1998, pp.1253-1262.

(90)      Sarraf, M., Bruneau, M. (1998). “Ductile Seismic Retrofit of Steel Deck-Truss Bridges. II: Design Applications", ASCE Journal of Structural Engineering, Vol.124, No.11, 1998, pp. 1263-1271.

(91)      Zahrai, S.M., Bruneau, M. (1998). “Impact of Diaphragms on Seismic Response of Straight Slab-on-girder Steel Bridges”, ASCE Journal of Structural Engineering, Vol.124, No.8, pp.938-947.

(92)      Bruneau, M. (1998). “Performance of Steel Bridges during the 1995 Hyogo-ken Nanbu (Kobe, Japan) Earthquake - A North American Perspective”, Invited paper, Special Edition of the Journal of Engineering Structures, Vol. 20, No.12, 1998, pp.1063-1078.

(93)      Bruneau, M., Boussabah, L. (1997). “Impact of Modeling Assumptions on Assessing the Seismic Resistance of the Montgomery Block Building”, ASCE Journal of Structural Engineering, Vol.123, No.11, pp.1423-1434.

(94)      Bruneau, M., Zahrai, S.M. (1997). “Some Observations on Effect of Severe Corrosion on the Cyclic Ductility of Steel”, ASCE Journal of Structural Engineering, Vol.123, No.11, pp.1478-1486.

(95)      Dicleli, M., Bruneau, M. (1996). “Quantitative Approach to Rapid Seismic Evaluation of Slab-on-Girder Steel Highway Bridges”, ASCE Journal of Structural Engineering, Vol.122, No.10, pp.1160-1168.

(96)      Bruneau, M., Sarraf, M.H.K. (1996). “Cyclic Testing of Existing and Retrofitted Riveted Stiffened-Seat Angle Connections”, ASCE Journal of Structural Engineering, Vol.122, No.7, pp.762-775 (Canadian Association for Earthquake Engineering Prize awarded to M. Sarraf for best paper based on a Canadian student Master or Doctoral thesis in earthquake engineering and published in a refereed journal).

(97)      Bruneau, M., Yoshimura, K. (1996). “Damage to Masonry Buildings caused by the 1995 Hyogo-ken Nanbu (Kobe, Japan) Earthquake”, Canadian Journal of Civil Engineering, Vol. 23, No.3, pp.797-807.

(98)      Bruneau, M., Wilson, J.W., Tremblay, R. (1996). “Performance of Steel Bridges during the 1995 Hyogo-ken Nanbu (Kobe, Japan) Earthquake”, Canadian Journal of Civil Engineering, Vol. 23, No.3, pp.678-713. (Pratley Award for best paper on bridge engineering published in the Canadian Journal of Civil Engineering in 1996).

(99)      Tremblay, R., Bruneau, M., Nakashima, M., Prion, H.G.L., Filiatrault, M., DeVall, R. (1996). “Seismic Design of Steel Buildings: Lessons from the 1995 Hyogo-ken Nanbu Earthquake”, Canadian Journal of Civil Engineering, Vol.23, No.3, pp.757-770. (Honorable mention (2nd place) for the Gzowski Medal for best paper published in the Canadian Journal of Civil Engineering in 1996).

(100)    Bruneau, M., Wang, N. (1996). “Some Aspects of Energy Methods for the inelastic seismic response of ductile SDOF structures”, Engineering Structures Journal, Vol.18, No.1, pp.1-12.

(101)    Bruneau, M., Wang, N. (1996). “Normalized Energy-Based Methods to Predict the Seismic Ductile Response of SDOF Structures”, Engineering Structures Journal, Vol.18, No.1, pp.13-28.

(102)    Dicleli, M., Bruneau, M. (1995). “Seismic Performance of Simply-supported and Continuous Slab-on-Girder Steel Bridges”, ASCE Journal of Structural Engineering, Vol.21, No.10, pp.1497-1505.

(103)    Dicleli, M., Bruneau, M. (1995). “A Fatigue-Based Methodology to Manage Impact of Heavy Permit-Trucks on Steel Highway Bridges”, ASCE Journal of Structural Engineering, Vol.21, No.11, 1651-1659.

(104)    Dicleli, M., Bruneau, M. (1995). “An Energy Approach to Sliding of Simple-Span Simply Supported Slab-on-Girder Steel Highway Bridges with Damaged Bearings”, Journal of Earthquake Engineering and Structural Dynamics, Vol.24, No.3, pp.395-409.

(105)    Dicleli, M., Bruneau, M. (1995). “Seismic Performance of Multi-Span Simply Supported Slab-on-Girder Steel Highway Bridges”, Engineering Structures Journal, Vol.17, No.1, pp.4-14.

(106)    Suzuki, Y., Fujiwara, T., Nakashima, M., Bruneau, M., Iwai, S., Kitahara, A. (1995). “Overview of Building Damage during the 1995 Great Hanshin Earthquake”, Journal of Natural Disaster Sciences, Vol.16, No.2, pp.79-87.

(107)    Nakashima, M., Fujiwara, T., Suzuki, Y., Bruneau, M., Iwai, S., Kitahara, A. (1995). “Damage to Engineered Buildings from the 1995 Great Hanshin Earthquake”, Journal of Natural Disaster Sciences, Vol.16, No.2, pp.71-78.

(108)    Bruneau, M. (1995). “Performance of Masonry Structures during the 1994, Northridge (L.A.) Earthquake”, Canadian Journal of Civil Engineering, Vol.22, No.2, pp.378-402.

(109)    Mitchell, D., Bruneau, M., Williams, M., Anderson, D.L., Sexsmith, R.G. (1995). “Performance of Bridges during the 1994 Northridge Earthquake”, Canadian Journal of Civil Engineering, Vol.22, No.2, pp.415-427.

(110)    Tremblay, R., Timler, P., Bruneau, M., Filiatrault, A. (1995). “Performance of Steel Structures during the January 17, 1994, Northridge earthquake”, Canadian Journal of Civil Engineering, Vol.22, No.2, pp.338-360.

(111)    Bruneau, M. (1994). “Strategies to Enhance the Well-Being of the Civil Engineering Profession”, ASCE Journal of Professional Issues in Engineering Education and Practice, Vol.120, No.3, pp. 341-359.

(112)    Saaticioglu, M., Bruneau, M. (1994). “Performance of Reinforced Concrete Structures during the 1992 Erzincan Earthquake”, ACI Concrete International Journal, Vol.16, No.9, pp. 51-56.

(113)    Bruneau, M., Lamontagne, M. (1994). “Impact from 20th Century Earthquakes in Eastern Canada and Lessons Learned on the Seismic Vulnerability of Unreinforced Masonry Buildings”, Canadian Journal of Civil Engineering, Vol.21, No.4, pp. 643-662.

(114)    Bruneau, M., Walker, D. (1994). “Cyclic Testing of Pultruded Fiber-Reinforced Plastic Beam-Column Rigid Connection”, ASCE Journal of Structural Engineering, Vol. 120, No.9, pp. 2637-2652.

(115)    Bruneau, M., Saatcioglu, M. (1994). “Behavior of Unreinforced Masonry Structures during the 1992 Erzincan, Turkey, Earthquake”, Masonry Society Journal, Vol.12, No.2, pp.78-87.

(116)    Bruneau, M. (1994). “Seismic Evaluation of Unreinforced Masonry Buildings - A State-of-the-Art Report”, Canadian Journal of Civil Engineering, Vol.21, No.3, pp.512-539 (Awarded the Gzowski Medal for best paper published in the Canadian Journal of Civil Engineering in 1994).

(117)    Bruneau, M., Cohen, J.M. (1994). “Review of the NBCC Earthquake-Resistant Design Requirements for Cladding Connectors”, Canadian Journal of Civil Engineering, Vol.21, No.3, pp.45-460.

(118)    Bruneau, M. (1994). “State-of-the-Art Report on the Seismic Performance of Unreinforced Masonry Buildings”, ASCE Journal of Structural Engineering, Vol.120, No.1, pp.230-251.

(119)    Saaticioglu, M., Bruneau, M. (1993). “Performance of Structures during the 1992 Erzincan (Turkey) Earthquake”, Canadian Journal Civil Engineering, Vol.20, No.2, pp.305-325.

(120)    Bruneau, M. (1993). “A Practical and Efficient Vectorial Approach to Consider Loads on Guyed-Towers' Cable Element”, International Journal of Computers & Structures, Vol.46, No.2, pp.331-338.

(121)    Bruneau, M. (1993). “Monitoring Well-Being of Civil Engineering Profession”, ASCE Journal of Professional Issues in Engineering Education and Practice,” Vol.119, No.1, pp.14-26, 1993.

(122)    Bruneau, M. (1992). “Evaluation of System-Reliability Methods for Cable-Stayed Bridge Design”, ASCE Journal of Structural Engineering, Vol.118, No.4, pp.1106-1120.

(123)    Bruneau, M., Mahin, S.A. (1992). Inelastic Seismic Torsional Response of Simple Symmetric Structures”, Canadian Journal of Civil Engineering, Vol.19, No.1, pp.11-25.

(124)    Bruneau, M., Mahin, S.A. (1991). “Some Aspects of Defining a Simple General Purpose Model for the Study of Seismic Inelastic Torsional Coupling”, Journal of Earthquake Engineering, Vol.1, No.1, pp.1-19.

(125)    Bruneau, M., Mahin, S.A., (1991). “Some Aspects of the Seismic Inelastic Response of a Simple General Purpose Torsionally Coupled Model”, Journal of Earthquake Engineering, Vol.1, No.1, pp.21-40.

(126)    Bruneau, M., Mahin, S.A. (1991). Full Scale Tests of Butt Welded Splices in Heavy Rolled Steel Sections Subjected to Primary Tensile Stresses”, Engineering Journal of the American Institute of Steel Construction, Vol. 28, No.1, pp.1-17.

(127)    Bruneau, M., Mahin, S.A. (1990). “Normalizing the Inelastic Seismic Response of Structures having Eccentricities in Plan”, ASCE Journal of Structural Engineering, Vol. 116, No.12, pp. 3358-3379, and closure to a discussion, Vol. 118. No.5, 1992.

(128)    Bruneau, M., Mahin, S.A. (1990). “Ultimate Behavior of Heavy Steel Section Welded Splices and Design Implications”, ASCE Journal of Structural Engineering, Vol. 116, No. 8, pp.2214-2235.

(129)    Bruneau, M. (1990). “Preliminary Report of Structural Damage from the Loma Prieta (San Francisco) Earthquake of October 17, 1989, and Pertinence to Canadian Structural Engineering Practice”, Canadian Journal of Civil Engineering, Vol. 17, No. 2, pp.198-208.

(130)    Magued, M.H., Bruneau, M., Dryburgh, R.B. (1989). “Evolution of Design Standards and Recorded Failures of Guyed Towers in Canada”, Canadian Journal of Civil Engineering, Vol. 16, No. 5, pp. 725-732.

(131)    Bruneau, M., Magued, M.H., Dryburgh, R.B. (1989). “Recommended Guidelines for Upgrading Existing Towers”, Canadian Journal of Civil Engineering, Vol. 16, No. 5, pp.733-742.


Papers in Refereed Conference Proceedings (221)

 

(132)    Clayton, P.M., Dowden, D.M., Li, C.H., Berman, J., Bruneau, M., Lowes, L.M., Tsai, K.C., (2013). “Self-Centering Steel Plate Shear Walls for Improving Seismic Resilience”, Eight International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2015, Shanghai, China, July 2015.

(133)    Cimellaro, G.P., Reinhorn, A., Renschler, C., Solari, D., Bruneau, M., Arcidiacono, V., (2014). “Community Resilience Assessment Integrating Network Interdependencies”, 10th National Conference on Earthquake Engineering, Anchorage, Alaska, July 2014.

(134)    Clayton, P.M., Li, C.H., Dowden, D.M., Berman, J., Tsai, K.C., Lowes, L.M.,Bruneau, M., (2014). “Advances in Self-Centering Steel Plate Shear Wall Testing and Design - NEES Research” 10th National Conference on Earthquake Engineering, Anchorage, Alaska, July 2014.

(135)    Imani, R., Mosqueda, G., Bruneau, M., (2014). “Post-Earthquake Fire Resistance of Ductile Concrete Filled Double-Skin Tube Columns”, 10th National Conference on Earthquake Engineering, Anchorage, Alaska, July 2014.

(136)    Dowden, D.M., Bruneau, M., (2014). “Cyclic and Dynamic Testing of Self-centering Steel Plate Shear Walls”, 10th National Conference on Earthquake Engineering, Anchorage, Alaska, July 2014.

(137)    Purba, R., Bruneau, M., (2014). “Seismic Performance of Steel Plate Shear Walls Considering Various Design Approaches”, 10th National Conference on Earthquake Engineering, Anchorage, Alaska, July 2014.

(138)    Alzeni, Y., Bruneau, M., (2014). “Cyclic Inelastic In-plane Behavior of Concrete Filled Steel Sandwich Panel Walls”, 10th National Conference on Earthquake Engineering, Anchorage, Alaska, July 2014.

(139)    Clayton, P.M., Dowden, D.M., Li, C.H., Berman, J.,, Lowes, L.M., Bruneau, M., Tsai, K.C., (2013). “Pseudo-dynamic Testing of Self-centering Steel Plate Shear Walls”, 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan, November 2013.

(140)    Clayton, P.M., Dowden, D.M., Li, C.H., Berman, J., Bruneau, M., Lowes, L.M., Tsai, K.C., (2013). “Full-Scale Testing of Self-Centering Steel Plate Shear Walls”, ASCE/SEI Structures Congress, Pittsburg, May 2013.

(141)    Cimellaro, G.P., Arcidiacono, V., Renschler, C., Bruneau, M., Reinhorn, A., (2013). Community Resilience Assessment Integrating Network Interdependencies”, ASCE/SEI Structures Congress, Pittsburgh, May 2013.

(142)    Cimellaro, G.P., Arcidiacono, V., Bruneau, M., Reinhorn, A.,(2013). “Disaster Resilience of Hospitals Considering Emergency Ambulance Services”, ASCE/SEI Structures Congress, Pittsburgh, May 2013.

(143)    Fouche, P., Bruneau, M., Chiarito, V., Manor, J., (2013). “Blast and Earthquake Resistant Bridge Pier Concept: Retrofit and Alternative Design Options”, ASCE/SEI Structures Congress, Pittsburgh, May 2013.

(144)    Fujikura, S., Bruneau M., (2013). Invited Paper, Multi-hazard Resistant of Highway Bridge Piers Having Concrete-filled Steel Tube,” International Symposium for Bridge Earthquake Engineering in Honor of Retirement of Professor Kazuhiko Kawashima, Tokyo, Japan, March 15, 2013.

(145)    Bruneau, M., (2013). Invited Keynote Speaker, “Self-centering Steel Plate Shear Walls”, Steel Innovations 2013 Conference, Christchurch, February 2013.

(146)    Bruneau, M., Alzeni, Y., Fouche, P., (2013). Invited Paper Seismic Behavior of Concrete-filled Steel Sandwich Walls and Concrete-filled Steel Tube Columns”, Steel Innovations 2013 Conference, Christchurch, February 2013 - Also presented at 7th Seismic Bridge Conference, Oakland, California, May 2013.

(147)    Palermo, A., Wotherspoon, L., M., Hogan, L., Kivell, A., Yashinsky, M., Bruneau, M., Camnasio, E., (2012). Invited, Overview of Bridge Performance during the 2011 Christchurch Earthquake”, 28th US-Japan Bridge Engineering Workshop, Portland, Oregon, October 2012.

(148)    Clifton, G.C., Nashid, H., Ferguson, G, Bruneau, M., MacRae, G.A., Gardiner, S., (2012). Performance of Eccentrically Braced Framed Buildings In The Christchurch Earthquake Series of 2010/2011”, 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September. 2012, Paper 2502..

(149)    Celik, O.C., Bruneau, (2012). Bidirectional-resistant Ductile End Diaphragms with Buckling Restrained Braces for Skewed Steel Bridges ”, 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September. 2012, Paper 0603.

(150)    Cimellaro G.P., Arcidiacono V., Reinhorn A. M., Bruneau M., (2012), "Community Resilience Evaluation Including Interdependencies", 15th World Conference on Earthquake Engineering, Lisbon Portugal, Paper 5532

(151)    Cimellaro, G.P., Villa, O., Reinhorn, A.M., Bruneau, M., Kim, H.U., (2012). “Resilience-Based Design of Natural Gas Pipelines”, 15th World Conference on Earthquake Engineering, Lisbon Portugal

(152)    Dowden, D.M., Clayton, P.M., Winkley, T., Berman, J., Bruneau, M., Lowes, L.M., (2012). Experimental Investigation of Self-centering Steel Plate Shear Walls”, ASCE/SEI Structures Congress, Chicago, March 2012.

(153)    Palermo, A., Wotherspoon, L., M., Hogan, L., Kivell, A., Yashinsky, M., Bruneau, M., Camnasio, E., (2012). “Overview of Bridge Performance during the 2011 Christchurch Earthquake”, 6th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), Lake Como, Italy, July 2012.

(154)    Wotherspoon, L., Hogan, L., Palermo, A., LeHeux, M., Bruneau, M., Anagnostopoulou, M., (2012). “Performance of Bridges during the 2010 Darfield Earthquake”, 6th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), Lake Como, Italy, July 2012.

(155)    Bruneau, M. (2012). Keynote Lecture, Steel Plate Shear Walls (SPSW), TEBF, CFST, SF, and Other Short Stories”, T.R. Higgins Award Lecture (http://www.aisc.org/content.aspx?id=572), presented to:

             - North American Steel Construction Conference, Dallas, Texas, April 2012.

             - Rocky Mountain Steel Construction Association, Denver, June 2012

             - Structural Engineers Association of Texas State Conference, San Antonio, Texas, Sept. 2012

             - University of Minnesota, Minneapolis, Minnesota, September 2012.

- Pacific Northwest Steel Fabricators Association, Portland, Oregon, October 2012

             - Pacific Northwest Steel Fabricators Association, Seattle, Washington, November 2012

             - Structural Engineers Association of Central California, Sacramento, California, March 2013

             - Structural Engineers Association of New York, New York, March 2013

             - 58th Structural Engineering Conference, Lawrence, Kansas, March 2013

             - Purdue University, West Lafayette, Indiana, March 2013

             - Structural Engineerings Institute - Maryland, Baltimore, MD, March 2013

             - Structural Engineers Association of Alabama, Birmingham, Alabama, April 2013

(156)    Clifton, C., Bruneau, M., MacRae, G., Leon, R., Fussell, A., (2012). Invited Keynote Paper, presented by C. Clifton, “Multistorey Steel Framed Building Damage from the Christchurch Earthquake Series of 2010/2011”, Seventh International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2012, Santiago, Chile, January 2012.

(157)    Cimellaro, G.C., Renschler, C., Frazier, A., Arendt, L., Bruneau, M., Reinhorn, A.M., (2011). “Community resilience index for road network systems”, Eighth International Conference on Structural Dynamics EURODYN 2011, Leuven, Belgium, July 2011.

(158)    Cimellaro, G.P., Renschler, C.S., Frazier, A., Arendt, L.A., Reinhorn, A.M., Bruneau, M., (2011). “State of Art of Community Resilience of Physical Infrastructures,” ASCE/SEI Structures Congress, Las Vegas, April 2011.

(159)    Clayton, P.M., Dowden, D., Purba, R., Berman, J.W., Lowes, L.N., Bruneau, M., (2011). “Seismic Design and Analysis of Resilient Steel Plate Shear Walls”, ASCE/SEI Structures Congress, Las Vegas, April 2011.

(160)    Purba, R., Bruneau, M., (2011). “Behavior of Steel Plate Shear Walls with In-Span Plastic Hinges”, ASCE/SEI Structures Congress, Las Vegas, April 2011.

(161)    El-Bahey, S., Bruneau, M., (2010). “Structural Fuse Concept for Bridges,” TRB Seventh International Bridge Engineering Conference, San Antonio, Texas, December 2010.

(162)    El-Bahey, S., Bruneau, M., (2010). Analytical Development and Experimental Validation of a Structural-Fuse Bridge Pier Concept,” 8th International Conference on Short and Medium Span Bridges, Niagara Falls, Ontario, Canada, August 2010 - CD-ROM Paper No.1302.

(163)    Fouche, P., Bruneau, M., (2010). Non-Linear Analysis of Multi-Hazard Performance of Concrete Filled Steel Tubes Bridge Piers,” 8th International Conference on Short and Medium Span Bridges, Niagara Falls, Ontario, Canada, August 2010.

(164)    Bahey, S.E., Bruneau, (2010). Structural Fuse Concept for Bridges”, Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.1302.

(165)    Purba, R., Bruneau, (2010). Finite Element Investigation and Design Recommendations for Perforated Steel Plate Shear Walls ”, Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.327.

(166)    Tremblay, R., Bruneau, M., Driver, R.G., Metten, A., Montgomery C.J., Rogers, C.A., (2010). Seismic Design of Steel Structures in Accordance with CSA-S16-09”, Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.1768.

(167)    Renschler, C.S., Frazier, A.E., Arendt, KL.A., Cimellaro, G.P., Reinhorn, A.M., Bruneau, M., Developing the ‘PEOPLES’ Resilience Framework for Defining and Measuring Disaster Resilience at the Community Scale”, Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.1827.

(168)    Berman, J, Lowes, L., Bruneau, M., Fahnstock, L., Tsai, K.C., (2010). An Overview of NEESR-SG: Smart and Resilient Steel Walls for Reducing Earthquake Impacts,” Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.1087.

(169)    Cui, S., Bruneau, M., Kasalanati, A. (2010). Behavior of Multi-directional Spring Units in Isolated Floor System,” Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.662.

(170)    Qu, B., Bruneau, M., (2010). Design of Steel Plate Shear Walls Considering Boundary Frame Moment Resisting Action,” Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.306.

(171)    Celik, O., Bruneau, M., (2010). Bidirectional-resistant Ductile End Diaphragms for Straight Steel Bridges,” Joint 9th US and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 2010 - CD-ROM Paper No.111.

(172)    Cimellaro, G.C., Reinhorn, A.M., Bruneau, M., (2010). “Organizational Model of a Hospital System”, 2010 New Zealand Society for Earthquake Engineering Annual Technical Conference, March 2010.

(173)    Bruneau, M., El-Bahey, S., Fujikura, S., Keller, D., (2010). Invited Keynote Speaker, “Structural Fuses and Concrete-Filled Steel Shapes for Seismic- and Multi-Hazard Resistant Design,” 2010 New Zealand Society for Earthquake Engineering Annual Technical Conference, March 2010.

(174)    Bruneau, M., Keller, D., Fouché, P., (2009). Invited Speaker, “Multi-Hazard (Blast, Seismic, Tsunamis, Collision) Resistant Bridge Piers”, 80th Shock & Vibration Symposium (SAVIAC), San Diego, California, October 2009.

(175)    El-Bahey, S., Bruneau, M., (2009). Invited Speaker, “Structural Fuse Concept for Bridges,” International Conference in Commemoration of the 10th Anniversary of the 1999 Chi-Chi Earthquake, Taipei, Taiwan, September 2009.

(176)    Fujikura, S., Bruneau, M., (2009). “Blast Performance of Various Seismic-Resistant Bridge Pier Concepts,” 5th New York City Bridge Conference, New York City, August 2009.

(177)    Pollino, M., Bruneau, M., (2009). “Experimental Seismic Testing of a Controlled Rocking Bridge Steel Truss Pier,” Sixth International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2009, Philadelphia, August 2009, pp.601-606.

(178)    Qu, B., Bruneau, M., (2009). “Seismic Design of Boundary Frame Members of Steel Plate Shear Walls,” Sixth International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2009, Philadelphia, August 2009, pp.965-970.

(179)    Keller, D., Bruneau, M., (2009). “Multi-Hazard Resistant Steel Plate Shear Wall Bridge Pier,” Sixth International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2009, Philadelphia, August 2009, pp.835-840.

(180)    Bruneau, M., Purba, R., Qu, B., Warn, R., Tsai, K.C., (2009). Invited Speaker, “Innovations in Steel Plate Shear Wall Design,” Sixth International Conference on Urban Earthquake Engineering, Tokyo, Japan, March 2009.

(181)    Fujikura, S., Bruneau, M., (2008). “Blast Resistance of Seismically Designed Bridge Piers”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008 - also presented at 6th National Seismic Conference on Bridges & Highways, Charleston, South Carolina, July 2008

(182)    Cui, S., Bruneau, M., (2008). “Isolated Floor Systems in Structural Fuse Frames”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.

(183)    Qu, B., Bruneau, M., (2008). Ductile Design of Intermediate Horizontal Boundary Elements in Steel Plate Shear Walls”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.

(184)    Vargas, R., Bruneau, M., (2008). “Experimental Validation of the Structural Fuse Concept”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.

(185)    Berman, J., Bruneau, M., (2008). “Development of Self-stabilizing Links for Eccentrically Braced Frames”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.

(186)    Berman, J., Bruneau, M., (2008). “An Improved Procedure for Capacity Design of Vertical Boundary Elements in Steel Plate Shear Walls”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.

(187)    Cimellaro, G.C., Fumo, C., Reinhorn, A.M., Bruneau, M., (2008). “Seismic Resilience of Health Care Facilities: Organizational Aspects”, 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.

(188)    Bruneau, M., Cimellaro, G.C., Fumo, C., Reinhorn, A.M., (2008). Invited Speaker, “Quantitative Disaster Resilience”, International Disaster and Risk Conference, Davos, Switzerland, August 2008.

(189)    Qu, B., Bruneau, M., Invited Speaker, Behavior and Design of Intermediate HBE in Steel Plate Shear Walls”, ASCE Structures Congress, Vancouver, B.C., Canada, April 2008.

(190)    Berman, J.W., Lowes, L.N., Okazaki, T., Bruneau, M., Tsai, K.C., Driver, R.G., Sabelli, R., “Research Needs and Future Directions for Steel Plate Shear Walls”, ASCE Structures Congress, Vancouver, B.C., Canada, April 2008.

(191)    Sabelli, R., Bruneau, M., Driver, R.G., “Steel Plate Shear Walls in the Upcoming 2010 AISC Seismic Provisions and 2009 Canadian Standard S16”, ASCE Structures Congress, Vancouver, B.C., Canada, April 2008.

(192)    Bruneau, M., Qu, B., Warn., G., Invited Speaker, Recent Development from Research on Steel Plate Shear Walls”, North American Steel Construction Conference, Nashville, Tennessee, April 2008.

(193)    Bruneau. M., Invited Keynote Speaker, Recent Developments in Ductile Steel Design Concepts”, Mexican XVI National Conference on Earthquake Engineering, Ixtapa, Mexico, October 2007.

(194)    Bruneau. M., Invited Speaker, “Experimental and Analytical Research on Behavior of Steel Plate Shear Walls”, SEAOC Convention 2007, Tahoe, California, September 2007.

(195)    Bruneau. M., Invited Keynote Speaker, Innovations in Earthquake Resistant Steel Structures”, 9th Canadian Conference on Earthquake Engineering, Ottawa, June 2007 - CD-ROM.

(196)    Qu, B, Bruneau. M., Lin, C.H., Tsai, K.C., Lin, Y.C.,Full Scale Steel Plate Shear Wall: NCREE/MCEER Phase II Tests”, 9th Canadian Conference on Earthquake Engineering, Ottawa, June 2007 - CD-ROM.

(197)    Lin, C.H., Tsai, K.C., Lin, Y.C., Wang, K.J., Qu, B, Bruneau. M., “Full Scale Steel Plate Shear Wall: NCREE/MCEER Phase I Tests”, 9th Canadian Conference on Earthquake Engineering, Ottawa, June 2007 - CD-ROM.

(198)    Bruneau. M., Invited Keynote Speaker, Emerging Hysteretic-Based Seismic Systems: Convergence of Ideas in Ductile Steel Design”, 10th World Conference on Seismic Isolation, Energy Dissipation and Vibration Control of Structures, Istanbul, May 2007.

(199)    Qu, B., Bruneau, M., “Analytical Study on Steel Plate Shear Walls using Dual Strip Model and 3D FE Model”, Workshop of the Asian-Pacific Network of Center in Earthquake Engineering Research, Hong Kong, May 2007.

(200)    Cui, S., Bruneau, M., “Preliminary Analysis of Isolated Raised Floors”, Workshop of the Asian-Pacific Network of Center in Earthquake Engineering Research, Hong Kong, May 2007.

(201)    Cimellaro, G.P., Reinhorn, A., Bruneau, M.,Seismic Resilience of Health Care Facilities - An MCEER Vision”, Proceedings of ANIDIS 2007- XII Convegno Nazionale “L'Ingegneria Sismica in Italia”, Italian National Association of Earthquake Engineering, paper 405, 10-14 June 2007, Pisa, Italy.

(202)    Pollino, M. and Bruneau, M. (2007). “Experimental Study of the Controlled Rocking Response of Steel Braced Frames”, 2007 ASCE Structures Congress, Long Beach, CA, May 2007.

(203)    Berman, J. and Bruneau, M. (2007). “Development of Self-stabilizing Links for Eccentrically Braced Frames”, 2007 ASCE Structures Congress, Long Beach, CA, May 2007.

(204)    Sabelli, R., Bruneau. M., Design of Steel Plate Shear Walls”, North American Steel Construction Conference, New Orleans, April 2007.

(205)    Berman, J., Bruneau, Invited Paper, “Proof-of-concept Testing and Finite Element Modeling of Self-Stabilizing Tubular Links for Eccentrically Braced Frames”, 4th International Symposium on Steel Structures, Seoul, Korea, November 2006.

(206)    Vian, D., Bruneau, M.,Testing of LYS Steel Plate Shear Walls”, 4th International Conference on Earthquake Engineering, Taipei October 2006 - CD ROM.

(207)    Lin, C.H., Tsai, K.C., Lin, Y.C., Wang, K.J., Weng, Y.T., Hsieh, W.D., Qu, B, Bruneau. M., “The Sub-Structural Pseudo-Dynamic Tests of a Full-Scale Two Story Steel Plate Shear Wall: Part I: Phase I Test”, 4th International Conference on Earthquake Engineering, Taipei October 2006 - CD ROM.

(208)    Bruneau, M.,Reinhorn, A., “Exploring the Concept of Seismic Resilience for Acute Care Facilities”, First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, September 2006.

(209)    Celik, O., Berman, J., Bruneau, M.,Hysteretic Energy Dissipation in Laterally Restrained Steel Tube and Solid Bar Braces”, First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, September 2006.

(210)    Vargas, R., Bruneau, M.,“Seismic Response and Design of Buildings with Metallic Structural Fuses”, Fifth International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2006, Yokohama, Japan, August 2006.

(211)    Celik, O., Berman, J., Bruneau, M.,“Ductile Design and Testing of Steel Bracing having Moveable Bracing Infills”, Fifth International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2006, Yokohama, Japan, August 2006.

(212)    Bruneau, M., Lopez-Garcia, D., Fujikura, S., Invited Speaker, “Multihazard-Resistant Highway Bridge Bent”, 2006 ASCE Structures Congress, St-Louis, May 2006 - also 5th Fifth National Seismic Conference on Bridges and Highways, San Francisco, September 2006.

(213)    Pollino, J., Bruneau, M.,Bi-directional Seismic Analysis and Design of Bridge Steel Truss Piers Allowing a Controlled Rocking Response”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 1954 - also 7th International Conference on Short & Medium Span Bridges, Montreal August 2006 - also Proceedings of the 21st U.S. Japan Bridge Engineering Workshop, Tsukuba, Japan, October 2005, pp.351-362.

(214)    Lopez-Garcia, D., Bruneau, Seismic Behavior of Intermediate Beams in Steel Plate Shear Walls”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 1089.

(215)    Berman, J., Bruneau, M.,Proof-of-concept Testing and Finite Element Modeling of Self-stabilizing Hybrid Rectangular Links for Eccentrically Braced Frames”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 239 - also First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, September 2006 - also 5th Fifth National Seismic Conference on Bridges and Highways, San Francisco, September 2006.

(216)    Filiatrault, A., Bruneau, M., Alesch, D., Constantinou, M., Dargush, D., Grigoriu, M., Lee, G., Maragakis, E., Mosqueda, G., Petak, W., Reinhorn, A., von Winterfeldt, D., Enhancing the Resilience of Acute Care Facilities: An Overview of Mceer Research”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 2034.

(217)    Bruneau, M., Reinhorn, A.,Overview of the Resilience Concept”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 2040.

(218)    Vargas, R., Bruneau, M.,Seismic Design of Multi-Story Buildings with Metallic Structural Fuses”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 280.

(219)    Cimellaro, G.P., Reinhorn, A., Bruneau, M.,Quantification of Seismic Resilience”, 8th National Seismic Conference, San Francisco, April 2006 - CD-ROM Paper No. 1094.

(220)    Bruneau, M., Invited Speaker, "Enhancing the Resilience of Communities against Extreme Events from an Earthquake Engineering Perspective", Proceedings of the ASCE Metropolitan Section Infrastructure Group Seminar – Infrastructure Safety & Security 2006, New York, March 2006.

(221)    Pollino, M., Bruneau, M., “Controlled Rocking System for Seismic Retrofit of Steel Truss Bridge Piers, Workshop of the Asian-Pacific Network of Center in Earthquake Engineering Research, Jeju, Korea, November 2005.

(222)    Cimellaro, G.P., Reinhorn, A., Bruneau, M.,Seismic Resilience of a Health Care Facility”, Workshop of the Asian-Pacific Network of Center in Earthquake Engineering Research, Jeju, Korea, November 2005.

(223)    Bruneau, M., Lopez-Garcia, D., Fujikura, S., “Earthquake and Multiple Hazard Protection of Highway Bridges”, Proceedings of the 21st U.S. Japan Bridge Engineering Workshop, Tsukuba, Japan, October 2005, pp.363-366.

(224)    Berman, J., Bruneau, M.,Considering Overturning In Braced Steel Bridge Pier Retrofit”, 2005 New York City Bridge Conference, September 2005, on CD-ROM.

(225)    Bruneau, M., Enhancing the Resilience of Communities against Extreme Events from an Earthquake Engineering Perspective”, IABSE Symposium on Structures and Extreme Events, Lisbon, Portugal, September, 2005, on CD-ROM.

(226)    Bruneau, M., Invited Keynote Speaker, “Seismic Design and Retrofit of Steel Structures”, 1st Canadian Conference on Effective Design of Structures, Hamilton, Ontario, July, 2005.

(227)    Bruneau, M., Berman, J., Lopez Garcia, D., Vian, D., Invited Speaker, Steel Plate Shear Wall Buildings: Design Requirements and Research”, North American Steel Construction Conference, Montreal, Canada, April 2005 - CD-ROM paper #075.

(228)    Sarraf, M, Bruneau, M., Innovative Design and Testing of a Seismically Retrofitted Deck-Truss Bridges”, North American Steel Construction Conference, Montreal, Canada, April 2005 - CD-ROM paper #175.

(229)    Bruneau, M., Invited Speaker, Seismic Risk - Why it should be Considered and Impediments to Implementation - An Earthquake Center Perspective”, ASCE 2005 Structures Congress, New York, April 2005.

(230)    Bruneau, M., Berman, J., Vian, D., Invited Speaker, Steel Plate Shear Walls - From Research to Codification”, ASCE 2005 Structures Congress, New York, April 2005.

(231)    Berman, J., Bruneau, M., “Proof-of-Concept Testing of a Laterally Stable Eccentrically Braced Frame for Steel Bridge Piers”, Proceedings of 20th US-Japan Bridge Engineering Workshop, Washington, D.C., October 2004, pp.217-228 - also 3rd US-PRC Workshop on Bridges, Shanghai, October, 2004.

(232)    Filiatrault, A., Aref, A., Bruneau, M., Constantinou, M., Lee, G., Reinhorn, A., Whittaker, A., Invited Speaker (Bruneau), “MCEER's Integrated Research on the Seismic Response Modification of Structural and Non-Structural Systems and Components in Hospitals”, International Conference in Commemoration of 5th Anniversary of the 1999 Chi-Chi Taiwan Earthquake, Taipei, September 2004 - on CD-ROM - also presented/published in Structural Engineers Association of California 2004 Convention, Monterey, California, August 2004, pp.73-81

(233)    Bruneau, M., Invited Keynote Speaker, Seismic Retrofit of Steel Structures”, VIII Mexican Symposium on Earthquake Engineering, Tlaxcala, Mexico, September 2004.

(234)    Vian, D., Bruneau, M.,“MCEER’s Experimental Research on Steel Plate Walls”, Structural Engineers Association of California 2004 Convention, Monterey, California, August 2004, pp.211-215.

(235)    Bruneau, M., Chang, S., Eguchi, R., Lee, G., O’Rourke, T., Reinhorn, A., Shinozuka, M., Tierney, K., Wallace, W., von Winterfelt, D., A Framework to Quantitatively Assess and Enhance the Seismic Resilience of Communities”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #2575.

(236)    Sarraf, M, Bruneau, M., Performance Tests Of Innovative Ductile Steel Seismically Retrofitted Deck-Truss Bridges”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #1803.

(237)    Paquette, J., Bruneau, M., Seismic Testing of Unreinforced Masonry Buildings with Flexible Diaphragm”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #2609.

(238)    Bruneau, M., Reinhorn, A., Constantinou, M., Whittaker, A., Thevanayagam, S., “The UB-NEES Versatile High Performance Testing Facility”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #1577.

(239)    Vargas, R., Bruneau, M., Seismic Response of Single Degree (SDOF) Structural Fuse Systems”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #3277.

(240)    Berman, J., Bruneau, M., Plastic Design and Testing of Light-Gauge Steel Plate Shear Walls”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #3323.

(241)    Pollino, M., Bruneau, M., Seismic Retrofit of Bridge Steel Truss Pier Anchorage Connections”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #3303.

(242)    Vian, D., Bruneau, M., Testing of Special LYS Steel Plate Shear Walls”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, August 2004 - CD-ROM paper #978.

(243)    Vargas, R., Bruneau, M., "Investigation of the Structural Fuse Concept", Workshop of the Asian-Pacific Network of Center in Earthquake Engineering Research, Honolulu, July 2004 - CD-ROM.

(244)    Bruneau, M., Reinhorn, A., Invited Speaker, Seismic Resilience of Communities - Conceptualization and Operationalization”, Workshop on Seismic Design Methodologies for the Next Generation of Codes, Bled, Slovania, July 2004 (proceedings in press).

(245)    Bruneau, M., Reinhorn, A., Whittaker, A., Constantinou, M., Thevanayagam, S., Sivaselvan, M., Shao, X., Hanley, J., Pitman, M.C., Albrechcinski, T., Invited paper, “The new UB-NEES Versatile Earthquake Engineering Facility for Real-Time Dynamic Hybrid Testing (RTDHT)”, ASCE 17th Engineering Mechanics Conference, Delaware, June 2004.

(246)    Filiatrault, A., Lee, G., Aref, A., Bruneau, M., Constantinou, M., Reinhorn, A., Whittaker, A., “Recent Progress Towards the Seismic Control of Structural and Non-structural Systems in Hospitals”, Proceedings of the US-Japan 36th Technical Meeting of Panel on Wind and Seismic Effects, Washington, D.C., May 2004, pp.101-125.

(247)    Paquette, J., Bruneau, M., Invited Speaker, “Testing of Full-Scale Single-Story Unreinforced Masonry Buildings Subjected to Simulated Earthquake Excitations”, Proceedings of the US-Portugal Workshop on Seismic Behavior of Masonry Structures, Guimaraes, Portugal, April 2004, pp.41-56.

(248)    Bruneau, M., Reinhorn, A., Whittaker, A., Constantinou, M., Thevanayagam, S., Sivaselvan, M., Shao, X., Hanley, J., Pitman, M.C., Albrechcinski, T., Invited Speaker, “The new UB-NEES Versatile Earthquake Engineering Hybrid Testing Facility”, Proceedings of the ASCE Seminar on Performance Based Earthquake Engineering - Seismic Retrofit of Structures, Brooklyn, New York, March 2004, pp.81-88

(249)    Bruneau, M., “Seismic Resistance of Unreinforced Masonry Buildings”, Invited Speaker, Proceedings of the ASCE Seminar on Performance Based Earthquake Engineering - Seismic Retrofit of Structures, Brooklyn, New York, March 2004, pp.126-134.

(250)    Bruneau, M., Invited Keynote Speaker, Overview of the Multidisciplinary Center for Earthquake Engineering Research (MCEER), Proceedings of the First International Conference on Urban Earthquake Engineering, Tokyo, March 2004 - also presented/published in Proceedings of the Workshop of the Asian-Pacific Network of Center in Earthquake Engineering Research, Honolulu, July 2004 - CD-ROM.

(251)    Bruneau, M., Lee, K., “Cyclic Testing of Steel Latticed Members”, Proceedings of the 4th National Seismic Conference & Workshop on Bridges and Highways, Memphis, Tennessee, February 2004.

(252)    Pollino, M., Bruneau, M., Controlled Rocking System for Seismic Retrofit of Steel Truss Bridge Piers”, Proceedings of the 4th National Seismic Conference & Workshop on Bridges and Highways, Memphis, Tennessee, February 2004 - also presented/published to the 2nd US-PRC Workshop, Buffalo, Dec. 2003, on CD-ROM.

(253)    Vian, D., Lin. Y.C., Bruneau, M., Tsai, K.C., “Cyclic Performance of Low Yield Strength Steel Panel Shear Walls”, Proc.of the 16th KKCNN Conference, Korea, Dec. 2003, pp.379-384.

(254)    Bruneau, M., Reinhorn, A., Whittaker, A., Constantinou, M., Thevanayagam, S., Sivaselvan, M., Shao, X., Hanley, J., Pitman, M.C., Albrechcinski, T., Invited Speaker, “The New UB-NEES Versatile Earthquake Engineering Hybrid Testing Facility”, Proceedings of Joint NCREE/JRC Workshop on International Collaboration on Earthquake Disaster Mitigation Research, Taipei, Taiwan, Nov. 2003, on CD-ROM.

(255)    Marson, J., Bruneau, M., “Seismic Design of Concrete-Filled Circular Steel Bridge Piers”, Proceedings of International Workshop on Steel and Concrete Composite Construction, Report NCREE-03-026, National Center for Research on Earthquake Engineering, Taipei, Taiwan, Nov. 2003, pp.57-66.

(256)    Bruneau, M., Chang, S., Eguchi, R., Lee, G., O’Rourke, T., Reinhorn, A., Shinozuka, M., Tierney, K., Wallace, W., von Winterfelt, D., “A Framework to Quantitatively Assess and Enhance the Seismic Resilience of Communities”, Proceedings of ATC-29-2 - Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities, Redwood City, California, October 2003, on CD-ROM.

(257)    Pollino, M., Bruneau, M., “Seismic Retrofit of Bridge Steel Truss Pier Anchorage Connections”, Proceedings of the Second New York City Bridge Conference, New York City, October 2003.

(258)    Berman, J., Bruneau, M., “Cyclic Testing of Special Steel Shear Walls and Modular Infill Panels”, Fourth International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2003, Naples, Italy, June 2003.

(259)    Reinhorn, A., Bruneau., M., Chu. S., Shao, X., Pitman, M., “Large Scale Real Time Dynamic Hybrid Testing Technique - Shake Tables Substructure Testing”, Proceedings of ASCE Structures Congress, Seattle, Washington, May 2003, on CD-ROM (Paper 587).

(260)    Bruneau, M., Whittaker, A., Reinhorn, A., Berman, J., Warn, G., Huyck, C., Adams, B., Invited keynote lecture, “Engineering and Organizational Issues Related to the World Trade Centre Terrorist Attack”, Proc. of Int. Conf. on Protection of Structures Against Hazards, Singapore, November 2002, pp. 1-10.

(261)    Zahrai, S.M., Bruneau, M., “Effect of Rust on Cyclic Ductility of Steel Members”, Proc. of Int. Conf. on Protection of Structures Against Hazards, Singapore, November 2002, pp. 363-370.

(262)    Bruneau, M., Vian, D., Experimental Investigation of P-Δ Effects to Collapse During Earthquakes”, 12th European Conference on Earthquake Engineering, London, UK, September 2002, on CD-ROM.

(263)    Bruneau, M., Reinhorn, A.M., Constantinou, M.C., Thevanayagam, S., Whittaker, A.S., Chu, S.Y., Pitman, M.C., Winter, K., “The UB-Node of the NEES Network - A Versatile High-Performance Testing Facility Towards Read-Time Hybrid Testing”, 12th European Conference on Earthquake Engineering, London, UK, September 2002, on CD-ROM (Paper Reference No.823).

(264)    Bruneau, M., Lee, K., Mander, J., “Ultimate Seismic Behavior of Latticed Steel Members in Bridge Piers”, 6th International Conference on Short & Medium Span Bridges, Vancouver, Canada, July 2002, on CD-ROM.

(265)    Bruneau, M., “MCEER Research to Integrate Multidisciplinary Aspects of Resilience”, Proc. of KEERC-MCEER Joint Seminar on Contributions to Earthquake Engineering,, Buffalo, NY, July 2002, pp.20-24; - also included (in PowerPoint format) in Proc. of the MCEER Workshop: Lessons from the World Trade Center Terrorist Attack, MCEER Special Report - MCEER-02-SP08, New York City, June 2002, on CD-ROM.

(266)    Lee, K., Bruneau, M., “Seismic Performance of Steel Bridge Latticed Brace Members”, Proc. of KEERC-MCEER Joint Seminar on Contributions to Earthquake Engineering,, Buffalo, NY, July 2002, pp.91-101 - also published in the Proc. of the 3rd International Workshop on Performance-based Seismic Design and Retrofit of Rransportation Facilities, Tokyo, Japan, July 2002, on CD-ROM.

(267)    Berman, J., Bruneau, M., “Experimental Investigation of Light-Gauge Steel Plate Shear Walls”, Proc. of KEERC-MCEER Joint Seminar on Contributions to Earthquake Engineering, Buffalo, NY, July 2002, pp.136-142.

(268)    Paquette, J., Bruneau, M., Pseudo-dynamic Testing of Unreinforced Masonry Buildings with Flexible Diaphragm”, 7th National Conference on Earthquake Engineering, Boston, July 2002, on CD-ROM.

(269)    Vian, D., Bruneau, M., Tests to Collapse of Simple Structures - Comparison with Existing Codified Procedures”, 7th National Conference on Earthquake Engineering, Boston, July 2002, on CD-ROM.

(270)    Reinhorn, A., Bruneau, M., Whittaker, A., Constantinou, M., Thevanayagam, S., Chu, J., Pitman, M., Winter, K., “A Versatile High Performance Testing Facility Towards Real-Time Dynamic Hybrid Testing”, 7th National Conference on Earthquake Engineering, Boston, July 2002, on CD-ROM (Paper Reference S-17/NS-1d) .

(271)    Sarraf, M., Bruneau, M., Seismic Performance of a Ductile Retrofitted Deck-Truss Bridge”, 7th National Conference on Earthquake Engineering, Boston, July 2002, on CD-ROM.

(272)    Bruneau, M., Lee, K., Mander, J., “Cyclic Testing of Truss Pier Braced Latticed Members”, Proc. Third National Seismic Conference and Workshop on Bridges and Highways, Portland, Oregon, May 2002, pp.479-484.

(273)    Sarraf, M., Bruneau, M., “Behaviour of Ductile Steel Retrofitted Deck-Truss Bridges”, Proc. Third National Seismic Conference and Workshop on Bridges and Highways, Portland, Oregon, May 2002, pp.581-589.

(274)    Mayes, R., Friedland, I., Anderson, D., Bruneau, M., Fenves, G., Kulicki, J., Mander, J., Marsh, L., Martin, G., Nutt, R., Power, M., Reinhorn, A., “Recommended LRFD Guidelines for the Seismic Design of Highway Bridges”, Proc. Third National Seismic Conference and Workshop on Bridges and Highways, Portland, Oregon, May 2002, pp.425-436.

(275)    Bruneau, M., Reinhorn, A.M., Constantinou, M.C., Thevanayagam, S., Whittaker, A., Chu, S.Y., Pitman, M., Winter, K., “Versatile Shake Tables and Large-Scale High Performance Testing Facility towards Real-Time Hybrid Seismic Testing”, CD-ROM, 2002 ASCE Structures Congress, Denver, April 2002.

(276)    Lee, G., Bruneau, M,. Whittaker, A., Reinhorn, A., Berman, J., Warn, G., “Damage to Buildings at Ground Zero Area and Ancillary Benefits of Earthquake-Resistant Design with Regard to Human-Made Disasters”, Invited Lecture, Proc. of the Urban Hazards Forum, John Jay College of Criminal Justice, January 2002 (CD-ROM).

(277)    Warn, G., Berman, J., Whittaker, A. Bruneau, M,., Invited paper, “Forensic Engineering Study of 130 Liberty Plaza”, Proc. of Learning from Urban Disasters; National Science Foundation Response and Opportunities for Future Research Hazards Forum Workshop, New York University, Dec. 2001, Natural Hazards Center report, (in press).

(278)    Bruneau, M., Lee, K., Mander, J., “Cyclic Testing of Steel Bridge Truss Pier Braced Members”, 17th US-Japan Bridge Engineering Workshop, Tsukuba, Japan, November 2001.

(279)    Bruneau, M., Lee, K., Mander, J., “Seismic Behavior of Steel Bridge Truss Pier Members”, Proc. 5th NSF Workshop on Bridge Research in Progress, Minneapolis, October 2001, pp.439-444.

(280)    Bruneau, M., General Overview of Earthquake Engineering Issues for MCEER Hospital Project, MEDAT-2 Workshop on Mitigation of Earthquake Disaster by Advanced Technologies, Las Vegas, Nevada, Nov. 30-Dec. 1, 2000, Bruneau, M. and Inman, D.J. (eds.).

(281)    Bruneau, M., “Overview of MCEER's Vision, Mission and Strategic Plan”, MEDAT-2 Workshop on Mitigation of Earthquake Disaster by Advanced Technologies, Las Vegas, Nevada, Nov. 30-Dec. 1, 2000, Bruneau, M. and Inman, D.J. (eds.).

(282)    Bruneau, M., “NCHRP 12-49 Proposed Seismic Provisions (Draft) for Steel Bridges”, 16th U.S.-Japan Bridge Engineering Workshop - Design, Modeling, Experimentation and Performance, Lake Tahoe, October 2000, pp.11-34.

(283)    Chessman, K., Bruneau, M., “Analytical Study of Buildings Constructred with Riveted Semi-Rigid Connections,” Third International Conference on Behavior of Steel Structures in Seismic Areas - STESSA 2000, Montreal, Canada, August 2000, pp.471-478.

(284)    Bruneau, M.,Invited Lecture, “Performance, évaluation et réhabilitation séismique des ponts d’acier”, 7e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art, Québec, Canada, May 2000.

(285)    Sarraf, M., Bruneau, M., “Ductile Seismic Retrofits of Steel Deck-Truss Bridges”, ASCE Structural Engineering Congress, Philadelphia, May 2000.

(286)    Bruneau, M., Marson, J., “Cyclic Testing of Concrete-Filled Steel Pipe Column Base Detail”, 6th Association for International Cooperation and Research in Steel-Concrete Composite Structures (ASCCS) International Conference on Steel and Concrete Composite Structures, Los Angeles, March 2000.

(287)    Paquette, J., Bruneau, M., “Pseudo-dynamic testing of Unreinforced Masonry Buildings with Flexible Diaphragms”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, January 2000, on CD-ROM.

(288)    Sarraf, M., Bruneau, M., “Design and Performance of Deck-trusses Retrofitted using Passive Energy Dissipating Devices”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, January 2000, on CD-ROM.

(289)    Zahrai, S.M., Bruneau, M., “Seismic Performance of Diaphragms in Slab-on-Girder Steel Bridges”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, January 2000, on CD-ROM.

(290)    Bruneau, M., Marson, J., “Cyclic Testing of Concrete-Filled Steel Tubes and Foundation Detail”, 15th U.S.-Japan Bridge Engineering Workshop, Tsukuba, Japan, November 1999.

(291)    Paquette, J., Bruneau, M., “Seismic Resistance of Full-Scale Single Story Brick Masonry Building Specimen”, 8th Canadian Conference on Earthquake Engineering, Vancouver, June 1999, pp.113-118.

(292)    Sarraf, M.H.K., Bruneau, M. “Innovative Application of Ductile Systems in Seismic Retrofit of Deck-Truss Bridges”, 8th Canadian Conference on Earthquake Engineering, Vancouver, June 1999, pp.683-688.

(293)    Bruneau, M., Paquette, J., “Pseudo-Dynamic Testing of Unreinforced Masonry Buildings with Flexible Diaphragm”, 8th North American Masonry Conference, Austin, June 1999, on CD-ROM.

(294)    Lee, G.C., Bruneau, M., Shinozuka, M., Tierney, K., “Application of Advanced Technologies in Seismic Protection of Critical Facilities - An MCEER Program”, 31st Joint Panel Meeting on Wind and Seismic Effects, Tsukuba, Japan, May 1999.

(295)    Zahrai, M., Bruneau, M., “Experimental Work on Ductile End-Diaphragms for Slab-on-Girder Steel Bridges”, Third International Conference on Seismology and Earthquake Engineering, Tehran, Iran, May 1999.

(296)    Filiatrault, A., Bruneau, M., Paquette, J., “Out-of-plane Seismic Behavior of Brick Masonry Walls of Turn-of-the-Century Residential Buildings”, ASCE Structures Congress, New Orleans, April 1999.

(297)    Taghdi, M., Bruneau, M., Saatcioglu, M., “Seismic Retrofit of Non-Ductile Concrete and Masonry Walls by Steel-Strips Bracing”, 11th European Conference on Earthquake Engineering, Paris, September 1998, on CD-ROM.

(298)    Bruneau, M., Bisson, M., “Seismic Retrofit of Concrete-Encased Riveted Stiffened Seat Angle Connections”, 11th European Conference on Earthquake Engineering, Paris, September 1998, on CD-ROM.

(299)    Taghdi, M., Bruneau, M., Saatcioglu, M., “Seismic Retrofit of Low-rise Masonry Walls by Steel Plates”, 8th Canadian Masonry Symposium, Jasper, June 1998, pp.115-126.

(300)    Zahrai, S.M., Bruneau, M., “Impact of Diaphragms on Seismic Performance of Slab-on-girder Steel Bridges”, 6th U.S. National Conference on Earthquake Engineering, Seattle, June 1998, on CD-ROM.

(301)    Bruneau, M., Bisson, M., Sarraf, M., “Tests of Three Seismic Retrofit Techniques for Riveted Stiffened Seat Angle Connections”, 6th U.S. National Conference on Earthquake Engineering, Seattle, June 1998, on CD-ROM .

(302)    Mitchell, D., Bruneau, M., Buckle, I., Bagnariol, D., Zhu, S., McCammon, N., Invited keynote lecture, Seismic Design Provisions - The Canadian Highway Bridge Design Code”, 5th International Conference on Short and Medium Span Bridges, Calgary, July 1998, on CD-ROM.

(303)    Bruneau, M., Zahrai, S.M., Sarraf, M., “Ductile End-Diaphragms to Seismically Retrofit Short and Medium Span Steel Bridges”, 5th International Conference on Short and Medium Span Bridges, Calgary, July 1998, on CD-ROM, also presented at the 14th U.S.-Japan Bridge Engineering Workshop, Pittsburgh, November 1998.

(304)    Bruneau, M., “Strategies to Monitor and Enhance the Well-Being of the Civil Engineering Profession”, Structural Engineers World Congress, San Francisco, July 1998, on CD-ROM.

(305)    Bruneau, M., Zahrai, S.M., “Special Ductile End-Diaphragms for the Seismic Retrofit (Substructure Protection) of Slab-on-Girder Steel Bridges”, Structural Engineers World Congress, San Francisco, July 1998, on CD-ROM.

(306)    Bruneau, M., “Experimental Facilities of the Ottawa Carleton Earthquake Engineering Research Centre”, 26th Canadian Society for Civil Engineering Annual Conference, Halifax, June 1998.

(307)    Bruneau, M., Zahrai, S.M., “Energy Dissipating Stiff Diaphragms for Steel Bridges in Seismic Regions”, 2nd World Conference on Constructional Steel Design, San Sebastian, Spain, May 1998, on CD-ROM (abstract also published in Journal of Constructional Steel Research, Vol.46, No.1-3, pp.42-43, 1998, with CD-ROM attached) .

(308)    Bruneau, M., Invited Lecture, “Seismic Performance of Unreinforced Masonry Buildings”, Eastern North American Section Annual Meeting of the American Concrete Institute, Montreal, December 1997, and Ottawa, April 1998.

(309)    Bruneau, M., Invited Lecture, “Earthquake-Resistant Steel Bridges: Canadian Design, Research and Expectations based on Observations from the 1995 Kobe Earthquake”, V Symposium Internacional de Estructuras de Acero, Guadalajara, Mexico, October 1997, pp.16-1 to 16-20.

(310)    Bruneau, M., “Seismic Performance of Masonry Structures and Relevant Seismological Parameters”, 69th Annual Meeting of the Eastern Section of the Seismological Society of America, Ottawa, October 1997.

(311)    Bruneau, M., Invited Keynote Lecture, “Seismic Design, Evaluation and Retrofit of bridges in Canada”, 2nd National Seismic Conference on Bridges and Highways, Sacramento, California, July 1997, 15 pages.

(312)    Dicleli, M., Bruneau, M., “Quantitative Approach for Rapid Vulnerability Assessment of Steel Highway Bridges”, 2nd National Seismic Conference on Bridges and Highways, Sacramento, California, July 1997, 12 pages.

(313)    Bruneau, M., Sarraf, M., “Seismic Retrofit Solutions for Deck-Trusses”, 2nd National Seismic Conference on Bridges and Highways, Sacramento, California, July 1997, 12 pages.

(314)    Bruneau, M., Bisson, M., Sarraf, M., “Seismic Retrofit of Riveted Stiffened Seat Angle Connections”, International Conference on Behavior of Steel Structures in Seismic Areas, Kyoto, Japan, August, 1997, pp.917-924.

(315)    Bruneau, M., Zahrai, S.M., “Alternating Plasticity Resistance of Corroded Steel Members”, International Conference on Behavior of Steel Structures in Seismic Areas, Kyoto, Japan, August, 1997, pp.130-137.

(316)    Bruneau, M., Zahrai, S.M., “Ductile End-Diaphragms to Seismically Protect Substructures of Slab-on-Girder Steel Bridges”, Fifth International Colloquium on Stability and Ductility of Steel Structures, Nagoya, Japan, July, 1997, pp.989-994.

(317)    Bruneau, M., Zahrai, S.M., “Some Observations on the Effect of Corrosion on the Ductility of Steel Members and Components”, Structural Stability Research Council Annual Technical Session, Toronto, Canada, June, 1997, pp.239-251.

(318)    Zahrai, S.M., Bruneau, M., “Capacity Design Principles and Ductile End-Diaphragms to Seismically Retrofit Slab-on-Girder Steel Bridges”, 25th Canadian Society for Civil Engineering Annual Conference, Sherbrooke, Canada, May, 1997, pp.399-407.

(319)    Zahrai, S.M., Bruneau, M., “Innovative Ductile Seismic Retrofit of Slab-on-Girder Steel Bridges”, 4th International Conference on Civil Engineering, Tehran, Iran, May 1997, Vol.1, pp.280-289.

(320)    Bruneau, M., Zahrai, S.M., “Effect of Corrosion on the Ductility of Steel Members and Components”, International Conference on Advances in Steel Structures, Hong Kong, Dec. 1996, pp.1121-1126.

(321)    Bruneau, M., “Performance of Steel Bridges during the 1995 Hyogoken-Nanbu (Kobe, Japan) Earthquake - A North American Perspective”, International Conference on Advances in Steel Structures, Hong Kong, December 1996, pp.547-552.

(322)    Sarraf, M.H.K., Bruneau, M., “Modeling and Behavior of Riveted Stiffened Seat Angle Connections”, 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June 1996, on CD-ROM.

(323)    Bruneau, M., Dicleli, M., “Seismic Resistance of a Class of Slab-on-Girder Steel Highway Bridges”, 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June 1996, on CD-ROM.

(324)    Bruneau, M., Zahrai, S.M., “Substructure Protection by Ductile End-Diaphragms in Steel Bridges”, 4th National Workshop on Bridge Research in Progress, Buffalo, N.Y., June 1996, pp.275-280.

(325)    Sarraf, M.H.K., Bruneau, M., “Cyclic Behavior of Existing and Retrofitted Riveted Stiffened Seat Angle Connections”, 7th Canadian Conference on Earthquake Engineering, Montreal, June 1995, pp.887-894.

(326)    Dicleli, M., Bruneau, M., “Non-Linear Seismic Response of Single Span Simply Supported Slab-on-Girder Steel Highway Bridges with Damaged Bearings”, 7th Canadian Conference on Earthquake Engineering, Montreal, June 1995, pp.729-737.

(327)    Bruneau, M., Sarraf, M.H.K., “Seismic Retrofit of Riveted Stiffened Seat Angle Connections”, ASCE 1995 Structures Congress, Boston, April 1995, pp.791-806.

(328)    Bruneau, M., “Damage to Masonry Buildings from the 1995 Hanshin-Awaji (Kobe, Japan) Earthquake), Seventh Canadian Masonry Symposium, Hamilton, pp.84-98, June 1995.

(329)    Bruneau, M., Wang, N., “Normalization of Energy-Based Methods to Predict Ductile Response of SDOF Structures”, Tenth European Conference on Earthquake Engineering, Vienna, Austria, August 1994, Vol.2, pp.919-926.

(330)    Saatcioglu, M., Bruneau, M., “Performance of Reinforced Concrete Structures During the 1992 Erzincan Earthquake in Turkey”, Tenth European Conference on Earthquake Engineering, Vienna, Austria, August 1994, Vol.1, pp.805-812.

(331)    Bruneau, M., Saatcioglu, M., “Behavior of Unreinforced Masonry Structures during the 1992 Erzincan, Turkey, Earthquake”, Fifth U.S. National Conference on Earthquake Engineering, Chicago, U.S.A., July 1994, Vol.3, pp.409-417.

(332)    Bruneau, M., Dicleli, M., “Cumulative Impact of Heavy Permit-Trucks on Steel Bridges”, ASCE 1994 Structures Congress, Atlanta, April 1994, Vol.1, pp.97-102.

(333)    Bruneau, M., Boussabah, L., “Predicting the Seismic Performance of Unreinforced Masonry Buildings - A Case Study”, 25th Anniversary Conference of the Association for Preservation Technology International, Ottawa, October 1993.

(334)    Bruneau, M., Tinawi, R., “The Eastern Canadian Experience in Seismic Risk Mitigation”, 1993 National Earthquake Conference, Memphis, Tennessee, May 1993, Vol. II, pp.31-40.

(335)    Bruneau, M., Invited, “Assessing the Seismic Performance of Existing Masonry Buildings in Canada”, technical session sponsored by the Masonry Subcommittee of ASCE-ACI Committee 442: Response of Concrete Buildings to Lateral Forces, Fall Convention of the American Concrete Institute, Puerto Rico, October 1992 (Part of the ACI Masonry in the Americas Project).

(336)    Bruneau, M., Invited, “Earthquake-Resistant Design of Masonry in Canada”, National Earthquake Training Conference and Seismic Products Exhibit, Jackson, Tennessee, November 1992 (Part of the ACI Masonry in the Americas Project).

(337)    Bruneau, M., Invited, “Selected Examples of Unreinforced Masonry Building Failures from Past Canadian Earthquakes” as part of Special Theme Session, Tenth World Conference on Earthquake Engineering, Madrid, Spain, July 1992, Post-Conference Volume, pp.6901-6902.

(338)    Boussabah, L. and Bruneau, M., “Review of the Seismic Performance of Unreinforced Masonry Walls”, Tenth World Conference on Earthquake Engineering, Madrid, Spain, July 1992, Vol.8, 4537-4540.

(339)    Bruneau, M., “A proposed Simple Model for the Study of Seismic Inelastic Torsional Coupling”, Tenth World Conference on Earthquake Engineering, Madrid, Spain, July 1992, Vol.7, pp.3875-3880.

(340)    Bruneau, M., Invited by the CSCE to present “Unreinforced Masonry Structures - Waiting to Die in an Earthquake”, 1992 CSCE Annual Conference, Quebec City, Quebec, May 1992, Vol.IV, pp.195-204.

(341)    Bruneau, M., “Myths and Realities of Earthquake Resistant Design in Quebec (In French)”, 1992 CSCE Annual Conference, Quebec City, Quebec, May 1992, Vol. IV, pp.225-234.

(342)    Bruneau, M., Liebich, L.J., “Analysis of Guyed Towers, Current Practice”, IASS-CSCE International Congress 1992 - Innovative Large Span Structures, Toronto, Ontario, July 1992, Vol.3, pp.303-314.

(343)    Bruneau, M., Magued, M.H., Dryburgh, R.B., Invited by the IASS Working Group for Masts and Towers to present “A Reliability Based Simple Procedure for the Upgrading of Existing Guyed-Towers Designed to Canadian Standards”, Meeting of the IASS Working Group for Masts and Towers, Stockholm, Sweden, September 1991.

(344)    Bruneau, M., Mahin, S.A., “Seismic Response of Symmetric Structures Having Unbalanced Yield Strengths in Plan”, Sixth Canadian Conference on Earthquake Engineering, Toronto, Canada, June 1991, pp.109-116.

(345)    Bruneau, M., “Canadian Perspective on Some Lessons Learned from the 1989 Loma Prieta (San Francisco) Earthquake”, 1991 CSCE Annual Conference, Vancouver, Canada, May 1991, Vol.3, pp.277-286.

(346)    Bruneau, M., “Review of Structural Damage to Existing Buildings, and Seismic Rehabilitation Lessons Learned from the 1989 Loma Prieta (San Francisco) Earthquake”, Second International Conference on Structural Studies, Repairs, and Maintenance of Historical Buildings, Seville, Spain, May 1991, Vol.2, pp.89-100.

(347)    Bruneau, M., Magued, M.H., Dryburgh, R., “Development of Reliability Classes for the Upgrading of Existing Towers”, 1991 ASCE Structures Congress, Indianapolis, USA, May 1991, pp.207-210.

(348)    Bruneau, M., Mahin, S.A., “Inelastic Torsional Response of Initially Symmetric Systems with Lateral Load Resisting Elements having Dissimilar Yield Strengths”, Ninth European Conference on Earthquake Engineering, Moscow, September 1990.

(349)    Bruneau, M., Mahin, S.A., “A Method to Achieve Parametric Independence on the Seismic Inelastic Response of Torsionally Coupled Systems”, Ninth European Conference on Earthquake Engineering, Moscow, September 1990.

(350)    Bruneau, M., Mahin, S.A., “A Method to Achieve Parametric Independence on the Seismic Inelastic Response of Torsionally Coupled Systems”, Fourth National Conference on Earthquake Engineering, Palm Spring, USA, May 1990, Vol. 2, pp. 381-390.

(351)    Bruneau, M., Mahin, S.A., “Prediction of Inelastic Response of Torsionally Coupled Systems”, Ninth World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, August 1988, Vol. 5, pp.79-84.

(352)    Bruneau, M. Mahin, S.A., “Investigation of Ultimate Behavior of A.I.S.C. Group 4 & 5 Heavy Steel Rolled Section Splices with Full and Partial Penetration Butt Welds”, Fifth Canadian Conference on Earthquake Engineering, Ottawa, July, 1987, pp. 789-798.


Books (3)

bookcover_low.gif
ductiledesign2ndcoversmall.jpg

 

(353)    Bruneau, M., Uang., C.M., Sabelli, R. (2011). “Ductile Design of Steel Structures - 2nd Edition”, McGraw-Hill, New York, NY, 921p.

(354)    Sabelli, R., Bruneau, M., (2007). “Steel Plate Shear Walls (AISC Design Guide)”, American Institute of Steel Construction, Chicago, Illinois, 144 p.

(355)    Bruneau, M., Uang., C.M., Whittaker, A. (1998). “Ductile Design of Steel Structures”, McGraw-Hill, New York, NY, 480 p.


Book Chapters and (5)

 

(356)    Uang., C.M., Bruneau, M., K.C. Tsai, (2014). “Seismic Design of Steel Bridges”, Chapter in “The CRC Handbook of Bridge Engineering - Seismic Design”, CRC Press, Boca Raton, Florida, pp.301-336.

(357)    Warn, G., Berman, J., Whittaker, A., and Bruneau, M., (2003). “Investigation of a Damaged High-Rise Building Near Ground Zero”, Chapter in “Beyond September 11th: An Account of Post-disaster Research”, Special Publication #39, Natural Hazards Research and Applications Information Center, University of Colorado, Boulder, CO, pp.199-240.

(358)    Uang., C.M., Bruneau, M., Whittaker, A., Tsai, K.C., (2001). “Seismic Design of Steel Structures”, Chapter in “The Seismic Design Handbook - 2nd edition”, Kluwer Academic Publishers, Boston, pp.411-462.

(359)    Uang., C.M., K.C. Tsai, Bruneau, M., (1999). “Seismic Design of Steel Bridges”, Chapter in “The CRC Handbook of Bridge Engineering”, CRC Press, Boca Raton, Florida, pp.39-1, 39-34

(360)    AIJ (Nakashima, M., Bruneau, M., Editors of English Edition). (1995). “Preliminary Reconnaissance Report of the 1995 Hyogoken-Nanbu Earthquake” by the Architectural Institute of Japan.


 Slide-Sets (3)

 

(361)    Bruneau, M., Wilson, J.W., Tremblay, R. (1995). “Seismic Performance of Steel Bridges during the 1995 Hanshin-Awaji (Kobe, Japan) Earthquake”, Annotated Slide-Set (52 slides), Earthquake Engineering Research Institute, Oakland, California.

(362)    Bruneau, M. (1994). Chapter “Assessing the Seismic Performance of Existing Masonry Buildings in Canada”, in “Masonry in the Americas” ACI Special Publication #147, pp.171-203.

(363)    Lamontagne, M., Bruneau, M. (1993). “Impact of the Eastern Canadian Earthquakes of 1925, 1929, 1935, 1944", Annotated Slide-Set (27 slides), Earthquake Engineering Research Institute, Oakland, California.


Earthquake (or other Disaster) Reconnaissance Report Chapters (10)

 

(364)    Bruneau, M., Whittaker, A., Reinhorn, A., (2002). “Engineering and Organizational Issues Related to the World Trade Center Attack, Volume 1, Overview of Damage to Buildings Near Ground Zero”, MCEER Special Report - MCEER-02-SP02, April 2002, 46 pages.

(365)    Berman, J., Warn, G., Whittaker, A., and Bruneau, M,. (2002). “Engineering and Organizational Issues Related to the World Trade Center Attack, Volume 2, Reconnaissance and Preliminary Assessment of a Damaged Building Near Ground Zero.”, MCEER Special Report - MCEER-02-SP03, May 2002, 40 pages.

(366)    Contributor to chapter on Performance of Buildings, Earthquake Spectra Special Issue: Izmit Earthquake Reconnaissance Report, Earthquake Engineering Research Institute Special Publication, Supplement to Volume 17.

(367)    Bruneau, M., Tsai, K.C. (1999). “Damage to Buildings from the September 21 1999 Taiwan Earthquake”, Chapter in “Report on the Taiwan Earthquake of September 21, 1999", Multidisciplinary Center for Earthquake Engineering Research, State University of New York, Buffalo, NY, September 2000.

(368)    Bruneau, M. (1999). “Damage to Buildings from the 17 August 1999 Kocaeli (Izmit) Turkey Earthquake”, Chapter in “Report on the Kocaeli (Turkey) Earthquake of August 17, 1999", Multidisciplinary Center for Earthquake Engineering Research, State University of New York, Buffalo, NY, May 2000.

(369)    Bruneau, M. (1995). “Damage to Masonry Buildings from the 1995 Hanshin-Awaji (Kobe, Japan) Earthquake”, Chapter in “Preliminary Report on the Hanshin-Awaji Earthquake of January 17, 1995", Canadian Association for Earthquake Engineering, Vancouver, Canada.

(370)    Bruneau, M., Wilson, J.W., Tremblay, R. (1995). “Seismic Performance of Steel Bridges during the 1995 Hanshin-Awaji (Kobe, Japan) Earthquake”, Chapter in same CAEE report as previous reference.

(371)    Tremblay, R., Bruneau, M., Prion, H.G.L., Filiatrault, M., DeVall, R. (1995). “Preliminary Observations on the Performance of Steel Buildings during the 1995 Hanshin-Awaji (Kobe, Japan) Earthquake”, Chapter in same CAEE report as previous reference.

(372)    Bruneau, M. (1994). “Performance of Masonry Structures during the Northridge (L.A.) Earthquake”, Chapter in “Preliminary Report on the Northridge, California, Earthquake of January 17, 1994", Canadian Association for Earthquake Engineering, Vancouver, Canada.

(373)    Contributor to chapter on Performance of Buildings, Earthquake Spectra Special Issue: Erzincan Earthquake Reconnaissance Report, Earthquake Engineering Research Institute Special Publication, Supplement to Volume 9, July 1993.


Non-Refereed Contributions


Technical Reports - Public Domain (41)

 

(374)    Cui, S., Bruneau, M., Constantinou, M., (2012). “Integrated Design Methodology for Isolated Floor Systems in Single-Degree-of-Freedom Structural Fuse Systems,” Technical Report MCEER-12-0004, MCEER, University at Buffalo, Buffalo, NY, 478 pages.

(375)    Purba, R., Bruneau, M., (2010). “Impact of Horizontal Boundary Elements Design on Seismic Behavior of Steel Plate Shear Walls,” Technical Report MCEER-10-0007, MCEER, University at Buffalo, Buffalo, NY, 160 pages.

(376)    Renschler, C.S., Frazier, A.E., Arendt, L.A., Cimellaro, G.P., Reinhorn, A.M., Bruneau, M., (2010). “A Framework for Defining and Measuring Resilience at the Community Scale: The PEOPLES Resilience Framework”, Technical Report MCEER-10-0006, MCEER, University at Buffalo, Buffalo, NY — also published as Report NIST GCR 10-930, National Institute of Standards and Technology, Office of Applied Economics, Engineering Laboratory, Gaithersburg, Maryland, 106 pages.

(377)    El-Bahey, S., Bruneau, M., (2010). “Analytical Development and Experimental Validation of a Structural-Fuse Bridge Pier Concept”, Technical Report MCEER-10-0005, MCEER, University at Buffalo, Buffalo, NY, 480 pages.

(378)    Cimellaro, G.P., Reinhorn, A.M., Bruneau, M., (2009). “Quantification of Disaster Resilience of Health Care Facilities”, Technical Report MCEER-09-0009, MCEER, University at Buffalo, Buffalo, NY, 212 pages.

(379)    Keller, D., Bruneau, M.,.(2008) "Development of a Steel Plate Shear Wall Bridge Pier System Conceived from a Multi-Hazard Perspective" Technical Report MCEER-08-0030, MCEER, University at Buffalo, Buffalo, NY, 244 pages.

(380)    Fujikura, S., Bruneau M.,(2008). "Experimental and Analytical Investigation of Blast Performance of Seismically Resistant Bridge Piers," Technical Report MCEER-08-0028, MCEER, University at Buffalo, Buffalo, NY, 342 pages.

(381)    Qu, B, Bruneau, M., (2008). “Seismic Behavior and Design of Boundary Frame Members in Steel Plate Shear Walls”, Technical Report MCEER-08-0012, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 272 pages.

(382)    Qu, B, Bruneau, M., (2008). “Testing of Full Scale Two-story Steel Plate Shear Walls with RBS Connections and Composite Floors”, Technical Report MCEER-08-0010, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 191 pages.

(383)    Pollino, M., Bruneau, M., (2008). “Analytical and Experimental Investigation of a Controlled Rocking Approach for Seismic Protection of Bridge Steel Truss Piers”, Technical Report MCEER-08-0003, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 484 pages.

(384)    Purba, R., Bruneau, M., (2007). “Design Recommendations for Perforated Steel Plate Shear Walls”, Technical Report MCEER-07-0011, MCEER, University at Buffalo, Buffalo, NY, 204 pages.

(385)    Fujikura, S., Bruneau, M., Lopez-Garcia, D., (2007). “Experimental Investigation of Blast Performance of Seismically Resistant Concrete-Filled Steel Tube Bridge Piers”, Technical Report MCEER-07-0005, MCEER, University at Buffalo, Buffalo, NY, 212 pages.

(386)    Celik, O.C., Bruneau, M., (2007). “Seismic Behavior of Bidirectional-Resistant Ductile End Diaphragms with Unbonded Braces in Straight or Skewed Steel Bridges”, Technical Report MCEER-07-0003, MCEER, University at Buffalo, Buffalo, NY, 204 pages.

(387)    Berman, J., Bruneau, M., “Further Development of Tubular Eccentrically Braced Frame Links for the Seismic Retrofit of Braced Steel Truss Bridge Piers”, Technical Report MCEER-06-0006, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 320 pages.

(388)    Vargas, R., Bruneau, M., “Experimental Investigation of the Structural Fuse Concept”, Technical Report MCEER-06-0005, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 210 pages.

(389)    Vargas, R., Bruneau, M., “Analytical Investigation of the Structural Fuse Concept”, Technical Report MCEER-06-0004, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 388 pages.

(390)    Cimellaro, G.P., Reinhorn, A.M., Bruneau, M., Rutenberg, A., (2006). “Multi-Dimensional Fragility of Structures”, Technical Report MCEER-06-0002, MCEER, University at Buffalo, Buffalo, NY, 162 pages.

(391)    Bruneau, M., Filiatrault, A., Lee, G.C., O'Rourke, T., Reinhorn, A.M., Tierney, K. and Shinozuka, M., (2006). “White Paper on the SDR Grand Challenges for Disaster Reduction”, Multidisciplinary Center for Earthquake Engineering Research, Technical Report Technical Report MCEER-05-SP09, MCEER, University at Buffalo, Buffalo, NY, 40 pages.

(392)    Vian, D., Bruneau, M., (2005). “Steel Plate Walls for Seismic Design and Retrofit of Building Structures”, Technical Report MCEER-05-0010, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, NY, 360 pages.

(393)    Berman, J., Bruneau, M., (2005). “Approaches for the Seismic Retrofit of Braced Steel Bridge Piers and Proof-of-Concept Testing of an Eccentrically Braced Frame with Tubular Link”, Technical Report MCEER-05-0004, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, NY, 168 pages.

(394)    Pollino, M., Bruneau, M., (2004). “Seismic Retrofit of Bridge Steel Truss Piers using a Controlled Rocking Approach”, Technical Report MCEER-04-0011, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 246 pages.

(395)    Lee, K., Bruneau, M., (2004). “Seismic Vulnerability Evaluation of Axially Loaded Steel Built-up Laced Members”, Technical Report MCEER-04-0007, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 324 pages.

(396)    Celik, O.C., Berman, J., Bruneau, M., (2004). “Cyclic Testing of Braces Laterally Restrained by Steel Studs to Enhance Performance During Earthquakes”, Technical Report MCEER-04-0003, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 2004, 250 pages.

(397)    Berman, J., Bruneau, M., (2003). “Experimental Investigation of Light-Gauge Steel Plate Shear Walls for the Seismic Retrofit of Buildings”, Technical Report MCEER-03-0001, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 2003, 212 pages.

(398)    Bruneau, M., editor, (2002). “Proceedings of the Workshop on Lessons from the World Trade Center Terrorist Attack: Management of Complex Civil Engineering & Terrorism-Resistant Civil Engineering Design”, New York City, June 24-25, 2002, Special Report - MCEER-02-SP08, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, November 2002, 172 pages (accompanied by 2 CD-ROMs).

(399)    Lee, K., Bruneau, M., (2002). “Review of Energy Dissipation of Compression Members in Concentrically Braced Frames, Technical Report MCEER-02-0005, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 216 pages.

(400)    Burke, S., Bruneau, M., (2002). “An Experimental Study on the Non-Destructive Evaluation of Corroded Bridge Steel”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 02-30, Ottawa, September 2002, 374 pages.

(401)    Nimis, R., Bruneau, M., editors, (2002). “Proceedings of the Third National Seismic Conference and Workshop on Bridges and Highways - Advances in Engineering and Technolgy for the Seismic Safety of Bridges in the New Millennium”, Portland, Oregon, April 28-May 1, 2002, Special Report - MCEER-02-SP04, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, April 2002, 624 pages.

(402)    Vian, D., Bruneau, M., (2001). “Experimental Investigation of P-Δ Effects to Collapse during Earthquakes”, Technical Report MCEER-01-0001, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, 2001, 360 pages.

(403)    Bruneau, M. and Inman, D.J., editors, “Proceedings of the Second MCEER Workshop on Mitigation of Earthquake Disaster by Advanced Technologies (MEDAT-2)”, Las Vegas, Nevada, Nov. 30-Dec. 1, 2000, Technical Report MCEER-01-0002, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, July 2001, 338 pages.

(404)    Paquette, J., Bruneau, M., “Seismic Testing of Unreinforced Masonry Building with Flexible Diaphragm”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 02-25, Ottawa, March 2002, 181 pages.

(405)    Marson, J., Bruneau, M., “Cyclic Testing of Concrete-Filled Circular Steel Tube Bridge Columns having Encased Fixed Based Detail”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 00-22, Ottawa, December 2000, 398 pages.

(406)    Taghdi, M., Bruneau, M., Saatcioglu, M., “Seismic Retrofit of Low-Rise Masonry and Concrete Walls by Steel Strips”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 98-21, Ottawa, in press.

(407)    Zahrai, Z.M., Bruneau, M., “Seismic Evaluation and Retrofit of Slab-on-Girder Steel Highway Bridges”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 98-20, Ottawa, March 1998.

(408)    Bisson, M.A., Bruneau, M., “Experimental Study on Cyclic Behavior of Riveted Stiffened Seat Angle Connections with Concrete Encasement”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 98-19, Ottawa, January 1998.

(409)    Bruneau, M., “Report on Activities of the Ottawa Carleton Earthquake Engineering Research Centre - The First 3 years (1994-97), Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 97-13, Ottawa, March 1997

(410)    Liu, J., Bruneau, M., “Comparison of Seismic Requirements between Canadian and American Building Codes and Case Study”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 96-10, Ottawa, September 1996, 294 pages.

(411)    Sarraf, M., Bruneau, M., “Experimental Study on Cyclic Behavior of Riveted Stiffened-Seat Angle Connections”, Ottawa Carleton Earthquake Engineering Research Centre report OCEERC 94-01, Ottawa, December 1994, 172 pages.

(412)    Bruneau, M., Dicleli, M., “Cumulative Effect of Extreme Permit Loads on Steel Bridges”, Report SRR-93-05, Ministry of Transportation of Ontario, Canada.

(413)    Bruneau, M., Mahin, S.A., “Seismic Inelastic Response of Structures with Stiffness or Mass Eccentricities”, Report UBC/EERC-87/12, Earthquake Engineering Research Center, University of California, Berkeley, September 1987, 297 pages.

(414)    Bruneau, M. Mahin, S.A., Popov, E.P., “Investigation of Ultimate Behavior of A.I.S.C. Group 4 & 5 Heavy Steel Rolled Section Splices with Full and Partial Penetration Butt Welds”, Report UBC/EERC-87/10, Earthquake Engineering Research Center, University of California, Berkeley, September 1987, 125 pages.


Confidential Engineering Reports further to Research Efforts or Investigation Work Only


Articles (21)

(415)    Bruneau, M., (2013). “Slenderness Limits for Built-up Box Links in the AISC Seismic Provisions”, Modern Steel Construction, Feb. 2013 issue, pp.52-53.

(416)    Clifton, C., Bruneau, M., MacRae, G., Leon, R., Fussell, A., (2012). “Link Fractures in Eccentrically Braced Steel Frames,” Natural Hazards Research Platform Magazine.

(417)    Bruneau, M., Clifton, C., MacRae, G., Leon, R., Fussell, A., (2012). “Link Fractures in Eccentrically Braced Steel Frames,” Structure Magazine, May 2012.

(418)    Comerio, M., Elwood, K., Berkowitz, R., Bruneau, M., Dismuke, J., Gavin, H., Gould, N., Jaiswal, K., Kirsch, T., Lai., T., Marshall, J., Mayes, R., Mitrani-Reiser, J., Morgan, T., Mote, T., Peek, L., Sritharan, S., Sutton, J., Turner, F., Wein, A., Yashinsky, M., O’Rourke, T., Fleischman, R., (2011). “The M 6.3 Christchurch, New Zealand, Earthquake of February 22, 2011" EERI Special Earthquake Report, EERI Newsletter, Vol,45, No.5, May 2011.

(419)    Comerio, M., Arendt, L., Bruneau, M., Dusicka, P., Gavin, H., Roeder, C., Turner, F., Lai., T., Williams, R., Boyd, O., Anagnostopoulou, M., Holmes, W., O’Rourke, T., (2010). “The Mw 7.1 Darfield (Canterbury), New Zealand Earthquake of September 4, 2010”, EERI Special Earthquake Report, EERI Newsletter, Vol,44, No.11, November 2010.

(420)    Tierney, K., ,Bruneau, M., “Conceptualizing and Measuring Resilience: A Key Concept in Disaster Loss Reduction”, TR News Magazine (published by Transportation Research Board), May-June 2007, by invitation.

(421)    Bruneau, M., Fujikura, S., “Blast Resistant Bridge Piers”, Structures Magazine, March 2007, pp. 19-21, by invitation.

(422)    Aref, A., Bruneau, M., Constantinou, M., Filiatrault, A., Lee, G., Reinhorn, A., Whittaker, A., “Seismic Response Modification of Structural and Non-Structural Systems and Components in Acute Care Facilities”, Research Progress and Accomplishments 2003-2004, Special Publication, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY, May 2004.

(423)    Bruneau, M., Reinhorn, A., Aref, A., Billington, S., Constantinou, M., Lee, G., Whittaker, A., “Advanced Technologies for Response Modification of Hospitals”, Research Progress and Accomplishments 2001-2003, Special Publication, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY, May 2003.

(424)    Vian, D., Sivaselvan, M., Reinhorn A., Bruneau M., “Analysis, Testing and Initial Recommendations on Collapse Limit States of Frames”, Research Progress and Accomplishments 2000-2001, Special Publication, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY, May 2001.

(425)    Friedland, I.M., Mayes, R.L., Bruneau, M., “Recommended Changes to the AASHTO Specifications for the Seismic Design of Highway Bridges (NCHRP Project 12-49),” Research Progress and Accomplishments 2000-2001, Special Publication, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY, May 2001.

(426)    Bruneau, M., Tsai, K.C. “Damage to Buildings”, Section in “Preliminary Report from MCEER-NCREE Workshop on the 921 Taiwan Earthquake”, Multidisciplinary Center for Earthquake Engineering Research, State University of New York, Buffalo, NY, October 1999.

(427)    Bruneau, M. “Structural Damage”, Section in “Preliminary Reports from the Kocaeli (Izmit) Earthquake of August 17, 1999", Multidisciplinary Center for Earthquake Engineering Research, State University of New York, Buffalo, NY, September 1999, pp.3-4.

(428)    Bruneau, M., Paquette, J., “Unreinforced Building in Ottawa to be Shaken by Repeated Earthquakes”, Annual Masonry Magazine, 1998-99, pp.37, by invitation.

(429)    Bruneau, M. “Seismic Evaluation of Unreinforced Masonry Buildings in Seismic Regions”, Annual Masonry Magazine, 1996, pp.28,33, by invitation.

(430)    Bruneau, M. “What is a Japanese Engineer?”, Canadian Association for Earthquake Engineering Newsletter, Vol. 3, No.1, 1996, pp.6-9, by invitation.

(431)    Bruneau, M. “Book Review of Dynamics of Civil Engineering Structures, by W.F. Kratzig and H.J. Niemann”, Canadian Journal of Civil Engineering, 1997, Vol.24, No.5, p.847.

(432)    Fujiwara, T., Suzuki, Y., Nakashima, M., Iwai, S., Kitahara, A., M., Bruneau, “Overview of Building Damage during the 1995 Great Hanshin Earthquake”, Disaster Prevention Research Institute Newsletter, Special Issue, February 1995.

(433)    Bruneau, M., Sarraf, M., “Behavior of Existing and Retrofitted Stiffened Seat Angle Connections”, Research Bulletin Board, Structural Engineers Association of Northern California Research Committee, April 1994.

(434)    Bruneau, M., Mahin, S.A., Discussion of “Inelastic Torsional Behavior of Asymmetric Buildings under Severe Earthquake Shaking” by A.M.Chandler and X.N.Duan, Structural Engineering Review International Journal, Vol.3, No.1, 1991, pp.51-52.

(435)    Bruneau, M. “Case Study of the Marina District Damage from the Loma Prieta Earthquake of October 17, 1989", Canadian Consulting Engineer Magazine, March/April 1990, pp. 46-47, by invitation.


Patents (2)

 

(436)    Tsai, K.C., Lin, Y.C., Bruneau, M. (2005). “Quake-resisting and Energy-dispersing Structural Assembly, and Method for Installing the Same”, Taiwanese Patent No. is 233958.

(437)    Tsai, K.C., Lin, Y.C., Bruneau, M. (Pending). “Quake-resisting and Energy-dispersing Structural Assembly, and Method for Installing the Same - Element Fonctionnel Porteur Parasismique et Dispersif d’énergie, et Méthode d'installation”, Canadian Patent Document #2485151 (Pending).


Others (12)

 

(438)    Bruneau, M., Anagnostopoulou, M., Palermo, A., 2010. “Preliminary Report on Bridge Damage from the Darfield (New Zealand) M7.1 Earthquake of September 4, 2010”, web-based report, http://mceer.buffalo.edu/research/Reconnaissance/New_Zealand9-04-10/damage-reports_bridges.asp

(439)    Bruneau, M., Anagnostopoulou, M., MacRae, G., Clifton, C., Fussell, A., 2010. “Preliminary Report on Steel Building Damage from the Darfield (New Zealand) M7.1 Earthquake of September 4, 2010”, web-based report, http://mceer.buffalo.edu/research/Reconnaissance/New_Zealand9-04-10/damage-reports_bridges.asp

(440)    Reinhorn, A., Bruneau, M., (2009). “Disaster Resilience Framework,” White Paper for NEES/E-Defense Collaborative Research Program on Earthquake Engineering Phase 2 Planning Meeting, Washington, D.C., January 2009.

(441)    Bruneau, M., Constantinou, M.C., Drury, C., Ellis, D., Hay, J., Lee, G.C., MacPherson, A., Mark, D., Mayrose, J., McMahon, T., Mitchell, C.E., Moskal, M., Murphy, T., Renschler, C., Russell, M., Ruyechan, W., Sheridan, M., Sternberg, E., and Weber, A.S., (2005). White Paper on Extreme Events: Mitigation and Response, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, December.

(442)    Lee., K., Bruneau, M., “Multidisciplinary Center for Earthquake Engineering Research (MCEER) at State University of New York at Buffalo”, Magazine of the Korea Concrete Institute, Vol. 14, No.6, 2002, pp.112-117.

(443)    Bruneau, M., “The Pernicious Effect of Using Statistics for Long Return Period Events”, Viewpoint, MCEER Newsletter, p.11, Summer 2001.

(444)    Bruneau, M., “Guide for Writing a Thesis”, Department of Civil, Structural, and Environmental Engineering, Internal Document (Update and Revision of 1993 document), 29 pages (plus Appendices), March 2000.

(445)    Bruneau, M., “Guide for Writing a Thesis”, Ottawa-Carleton Graduate Institute in Civil Engineering Internal Document, 30 pages (plus Appendices), May 1993.

(446)    Bruneau, M., Brief communication to Research Committee of the Structural Engineers Association of Northern California on the Tentative Seismic Design Requirements for Passive Energy Dissipation, February 1993.

(447)    Bruneau, M. “Study on Seismic Design Base Shear (NBC) - External Review”, General comments at the request Canadian Institute of Steel Construction on seismic-resistant design issues for steel structures in Canada, February 1992.

(448)    Bruneau, M., “Report on 'The Seismic Retrofit of Historic Buildings' Conference”, Brief note prepared at the request of the National Research Council of Canada, January 1992.

(449)    Bruneau, M., “Review of Historic Building Supplement to the B.C. Building Code and Case Studies for the Historic Building Supplement to the B.C. Building Code”, Brief communication to the Building Standards Branch, Ministry of Municipal Affairs, Province of British Columbia, March 1990.


Fiction - Book (3)

 

(450)    Bruneau, M., (2012). “The Emancipating Death of a Boring Engineer”, CePages Press, 314p.

(451)    Bruneau, M., (2009). “Shaken Allegiances”, CePages Press, 420p.

(452)    Bruneau, M., (1998). “Inhumanité - Onze Nouvelles qui insultent l’intelligence”, Les Editions Ottawack, Ottawa, Canada, 155 p.

EmancipatingDeath(100x150).jpg
shakenallegiancescoversmall.jpg
nouvelles_low.gif